On Sat, 27 Jun 2009 14:14:39 +0100, Alan Cox wrote: > > Does feel like hardware or a BIOS setup failure of some sort - is the > IDE/AHCI controller on the mainboard or a plug in card ? - Have you > checked the box for BIOS updates and also tried resetting to > the BIOS safe defaults and retesting ? Main board ... 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at 9c00 [size=8] I/O ports at 9880 [size=4] I/O ports at 9800 [size=8] I/O ports at 9480 [size=4] I/O ports at 9400 [size=32] Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci I'll try reseting the BIOS to defaults. Strangely I'm trying to reproduce a plain text file (370Mb), so I can see how corrupt the file gets ( easier to diff ) and its copied fine 64+ times so just seems to be binary files. Thanks for taking an interest. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
