Mike Burger wrote: >> I am still struggling with this f10 install. It appeared that the >> NIC in eth0 was no good. I pulled it out and left the second card >> which was/is eth1. >> >> It looks to me like that designation eth1 might be changed to eth0 >> using ethtool but if so, I can't find the right command. >> >> I have used service-config-network to set it up as 192.168.1.10 and >> eth1, network-scripts is set up for eth1. but no matter what I do a >> ping to another computer yields "Network is unreachable." >> >> This is a wired connection. I've tried a different cat5 cable. >> "ethtools eth1" looks ok compared to the other computers. Not sure >> what I have missed but it would be simpler perhaps if I could >> convince the NIC that it was eth0 instead of eth1 but I can't >> determine how that is set. >> >> Any help appreciated. I am about at wits end. > > Actually, it's probably in your /etc/modprobe.conf file. > It can be, but /etc/udev/rules.d/70-persistent-net.rules tends to be more important - it maps the MAC address to the device name. Then you may also have the HWADDR=<MAC address> option in your /etc/sysconfig/network-scripts/ifcfg=eth? file. That will provent the interface from coming up if the MAC address of the NIC does not match. You can edit the 70-persistent-net.rules file, or you can delete it if you want to renumber the NICs. It will be re-created for you the next time you boot. Change the HWADDR= value requires you do edit the ifcfg-eth? file. (Hand edit or GUI.) Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup!
Attachment:
signature.asc
Description: OpenPGP digital signature
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
