Hi;
tvtime gives me a great picture but no sound.
mplayer gives me a terrible picture and no sound.
(terrible = inverted picture with green background; just black and
magenta for colours; and vertical lines running through it.)
Is there a way to find out which video codecs etc. tvtime is using so I
can duplicate them in mplayer. tvtime -v doesn't tell me (I think) nor
is mplayer -v helpful.
I have tried the sound with PulseAudio installed and removed. No
difference.
Here is what I have today
__________________________
~]$ tvtime -v
...
cpuinfo: CPU Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz, family 6,
model 7, stepping 10.
cpuinfo: CPU measured at 2799.981MHz.
tvtime: Cannot set priority to -10: Permission denied.
xcommon: Display :0.0, vendor The X.Org Foundation, vendor release
10503000
xfullscreen: Using XINERAMA for dual-head information.
xfullscreen: Pixels are square.
xfullscreen: Number of displays is 1.
xfullscreen: Head 0 at 0,0 with size 1680x1050.
xcommon: Have XTest, will use it to ping the screensaver.
xcommon: Pixel aspect ratio 1:1.
...
xcommon: Displaying in a 1024x576 window inside 1024x576 space.
xvoutput: Using XVIDEO adaptor 280: NV17 Video Texture.
speedycode: Using MMXEXT optimized functions.
station: Reading stationlist from /home/bill/.tvtime/stationlist.xml
videoinput: Using video4linux2 driver 'cx23885', card 'Hauppauge
WinTV-HVR1800' (bus PCIe:0000:02:00.0).
videoinput: Version is 1, capabilities 5010011.
videoinput: Maximum input width: 720 pixels.
tvtime: Sampling input at 720 pixels per scanline.
xcommon: Pixel aspect ratio 1:1.
xcommon: Displaying in a 1024x576 window inside 1024x576 space.
xcommon: Received a map, marking window as visible (57).
__________________________________
]$ mplayer -v \
-tv device=/dev/video0:driver=v4l2:norm=ntsc-m:outfmt=uyvy\
:immediatemode=0:amode=1:forceaudio:volume=100:alsa:adevice=hw.0,0\
-vc rawuyvy,\
-vo xv\
-aspect 16:9\
-ao alsa\
-menu\
tv://
[the above is being run from a bash script -- alias mpl='mplayer4tv']
___________________________________
The mplayer command line above comes from a couple of googled suggested
command lines for use with my video card. I can't get any to work. The
above script is the result of intense manual reading etc. and trial and
error over the last few days.
____________________________________
]$ mpl
MPlayer SVN-r28461-4.3.2 (C) 2000-2009 MPlayer Team
CPU: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz (Family: 6, Model:
23, Stepping: 10)
get_path('codecs.conf') -> '/home/bill/.mplayer/codecs.conf'
Reading /home/bill/.mplayer/codecs.conf: Can't open
'/home/bill/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf':
No such file or directory
Using built-in default codecs.conf.
Configuration: --prefix=/usr --bindir=/usr/bin
--datadir=/usr/share/mplayer --mandir=/usr/share/man
--confdir=/etc/mplayer --libdir=/usr/lib64 --codecsdir=/usr/lib64/codecs
--target=x86_64-linux --language=all --enable-joystick
--enable-largefiles --enable-lirc --enable-menu
--enable-runtime-cpudetection --enable-unrarexec
--disable-dvdread-internal --disable-libdvdcss-internal --disable-nemesi
--disable-smb --disable-faac-lavc --disable-mp3lame-lavc
--disable-x264-lavc --disable-libamr_nb --disable-libamr_wb
--disable-faad-internal --disable-mad --disable-tremor-internal
--disable-bitmap-font --disable-directfb
--with-fribidi-config=pkg-config fribidi --disable-svga
--disable-termcap --enable-xvmc --with-xvmclib=XvMCW --disable-arts
--disable-esd --disable-jack --disable-openal
CommandLine: '-v' '-tv'
'device=/dev/video0:driver=v4l2:norm=ntsc-m:outfmt=uyvy:immediatemode=0:amode=1:forceaudio:volume=100:alsa:adevice=hw.0,0' '-vc' 'rawuyvy,' '-vo' 'xv' '-aspect' '16:9' '-ao' 'alsa' '-menu' 'tv://'
init_freetype
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
get_path('fonts') -> '/home/bill/.mplayer/fonts'
Using nanosleep() timing
get_path('input.conf') -> '/home/bill/.mplayer/input.conf'
Parsing input config file /home/bill/.mplayer/input.conf
Input config file /home/bill/.mplayer/input.conf parsed: 89 binds
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote
control.
get_path('menu.conf') -> '/home/bill/.mplayer/menu.conf'
[libmenu] got keybinding element 275 UP=>[menu up].
[libmenu] got keybinding element 274 DOWN=>[menu down].
[libmenu] got keybinding element 273 LEFT=>[menu left].
[libmenu] got keybinding element 272 RIGHT=>[menu right].
[libmenu] got keybinding element 13 ENTER=>[menu ok].
[libmenu] got keybinding element 263 ESC=>[menu cancel].
[libmenu] got keybinding element 259 HOME=>[menu home].
[libmenu] got keybinding element 260 END=>[menu end].
[libmenu] got keybinding element 261 PGUP=>[menu pageup].
[libmenu] got keybinding element 262 PGDWN=>[menu pagedown].
[libmenu] got keybinding element 387 JOY_UP=>[menu up].
[libmenu] got keybinding element 386 JOY_DOWN=>[menu down].
[libmenu] got keybinding element 385 JOY_LEFT=>[menu left].
[libmenu] got keybinding element 384 JOY_RIGHT=>[menu right].
[libmenu] got keybinding element 404 JOY_BTN0=>[menu ok].
[libmenu] got keybinding element 405 JOY_BTN1=>[menu cancel].
[libmenu] got keybinding element 1288 AR_VUP=>[menu up].
[libmenu] got keybinding element 1289 AR_VDOWN=>[menu down].
[libmenu] got keybinding element 1284 AR_PREV=>[menu left].
[libmenu] got keybinding element 1282 AR_NEXT=>[menu right].
[libmenu] got keybinding element 1280 AR_PLAY=>[menu ok].
[libmenu] got keybinding element 1286 AR_MENU=>[menu cancel].
[libmenu] got keybinding element 1285 AR_PREV_HOLD=>[menu home].
[libmenu] got keybinding element 1283 AR_NEXT_HOLD=>[menu end].
[libmenu] got keybinding element 512 MOUSE_BTN0=>[menu click].
[libmenu] got keybinding element 514 MOUSE_BTN2=>[menu cancel].
[libmenu] got keybinding element 1284 AR_PREV=>[menu pageup].
[libmenu] got keybinding element 1282 AR_NEXT=>[menu pagedown].
[libmenu] got keybinding element 256 BS=>[menu left].
[libmenu] got keybinding element 1284 AR_PREV=>[menu left].
[libmenu] got keybinding element 1282 AR_NEXT=>[menu right].
[libmenu] got keybinding element 1284 AR_PREV=>[menu left].
[libmenu] got keybinding element 1282 AR_NEXT=>[menu right].
[libmenu] got keybinding element 1285 AR_PREV_HOLD=>[menu left].
[libmenu] got keybinding element 1283 AR_NEXT_HOLD=>[menu right].
Menu initialized: /home/bill/.mplayer/menu.conf
get_path('.conf') -> '/home/bill/.mplayer/.conf'
Playing tv://.
get_path('sub/') -> '/home/bill/.mplayer/sub/'
STREAM: [tv] tv://
STREAM: Description: TV Input
STREAM: Author: Benjamin Zores, Albeu
STREAM: Comment:
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschewski@xxxxxxxxxxxxxxxx>
comment: first try, more to come ;-)
Selected device: Hauppauge WinTV-HVR1800
Tuner cap:
Tuner rxs:
Capabilites: video capture VBI capture device tuner read/write
streaming
supported norms: 0 = NTSC-M; 1 = NTSC-M-JP; 2 = NTSC-443; 3 = PAL-BG; 4
= PAL-I; 5 = PAL-DK; 6 = PAL-M; 7 = PAL-N; 8 = PAL-Nc; 9 = PAL-60; 10 =
SECAM-DK; 11 = SECAM-L;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Format GREY ( 8 bits, 8 bpp, gray): Planar Y800
Format RGB555 (16 bits, 15 bpp RGB, le): BGR 15-bit
Format RGB555X (16 bits, 15 bpp RGB, be): Unknown 0x51424752
Format RGB565 (16 bits, 16 bpp RGB, le): BGR 16-bit
Format RGB565X (16 bits, 16 bpp RGB, be): Unknown 0x52424752
Format BGR24 (24 bits, 24 bpp RGB, le): BGR 24-bit
Format BGR32 (32 bits, 32 bpp RGB, le): BGRA
Format RGB32 (32 bits, 32 bpp RGB, be): RGBA
Format YUYV (16 bits, 4:2:2, packed, YUYV): Packed YUY2
Format UYVY (16 bits, 4:2:2, packed, UYVY): Packed UYVY
Current format: BGR24
v4l2: setting audio mode
v4l2: current audio mode is : STEREO
v4l2: set Volume: 63 [0, 63]
v4l2: set format: UYVY
v4l2: set input: 0
Selected norm : ntsc-m
v4l2: set norm: NTSC-M
Selected channel list: europe-east (including 133 channels)
Current frequency: 38654710100 (2415919360.000)
==> Found video stream: 0
v4l2: get format: UYVY
v4l2: get fps: 29.970030
v4l2: get width: 640
v4l2: get height: 480
Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 44100
exact rate : 44100 (44100/1)
msbits : 16
buffer_size : 16384
period_size : 4096
period_time : 92879
tstamp_mode : NONE
period_step : 1
avail_min : 4096
period_event : 0
start_threshold : 0
stop_threshold : 16384
silence_threshold: 0
silence_size : 0
boundary : 4611686018427387904
appl_ptr : 0
hw_ptr : 0
v4l2: set audio samplerate: 44100
Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 44100
exact rate : 44100 (44100/1)
msbits : 16
buffer_size : 16384
period_size : 4096
period_time : 92879
tstamp_mode : NONE
period_step : 1
avail_min : 4096
period_event : 0
start_threshold : 0
stop_threshold : 16384
silence_threshold: 0
silence_size : 0
boundary : 4611686018427387904
appl_ptr : 0
hw_ptr : 0
v4l2: get audio format: 9
==> Found audio stream: 0
v4l2: get audio samplerate: 44100
v4l2: get audio samplesize: 2
v4l2: get audio channels: 2
TV audio: 2 channels, 16 bits, 44100 Hz
Audio capture - buffer 614 blocks of 16384 bytes, skew average from 16
meas.
Using a ring buffer for maximum 1716 frames, 1005 MB total size.
v4l2: set Brightness: 127 [0, 255]
v4l2: set Hue: 127 [0, 255]
v4l2: set Saturation: 127 [0, 255]
v4l2: set Contrast: 63 [0, 255]
[V] filefmt:9 fourcc:0x59565955 size:640x480 fps:29.970
ftime:=0.0334
get_path('sub/') -> '/home/bill/.mplayer/sub/'
X11 opening display: :0.0
vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1680x1050 with depth 24 and 32 bpp (":0.0" => local
display)
[x11] Detected wm supports NetWM.
[x11] Detected wm supports FULLSCREEN state.
[x11] Detected wm supports ABOVE state.
[x11] Detected wm supports BELOW state.
[x11] Current fstype setting honours FULLSCREEN ABOVE BELOW X atoms
[VO_XV] Using Xv Adapter #0 (NV17 Video Texture)
[xv common] Drawing no colorkey.
[xv common] Maximum source image dimensions: 2046x2046
==========================================================================
Forced video codec: rawuyvy
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 640 x 480 (preferred colorspace: Packed UYVY)
Trying filter chain: menu vo
VDec: using Packed UYVY as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO Config (640x480->854x480,flags=0,'MPlayer',0x59565955)
Unicode font: 4959 glyphs.
REQ: flags=0x437 req=0x0
VO: [xv] 640x480 => 854x480 Packed UYVY
VO: Description: X11/Xv
VO: Author: Gerd Knorr <kraxel@xxxxxxxxxxxxxxxxxxxxx> and others
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x59565955 (UYVY) packed
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 280 for hw scaling
[xv] dx: 0 dy: 0 dw: 854 dh: 534
Selected video codec: [rawuyvy] vfm: raw (RAW UYVY)
==========================================================================
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
dec_audio: Allocating 2048 + 65536 = 67584 bytes for output buffer.
AUDIO: 44100 Hz, 2 ch, s16le, 1411.2 kbit/100.00% (ratio:
176400->176400)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
Building audio filter chain for 44100Hz/2ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter dummy
[dummy] Was reinitialized: 44100Hz/2ch/s16le
[dummy] Was reinitialized: 44100Hz/2ch/s16le
Trying preferred audio driver 'alsa', options '[none]'
alsa-init: requested format: 44100 Hz, 2 channels, 9
alsa-init: using ALSA 1.0.20
alsa-init: setup for 1/2 channel(s)
alsa-init: using device default
alsa-init: pcm opened in blocking mode
alsa-init: chunksize set to 1024
alsa-init: fragcount=8
alsa-init: got buffersize=32768
alsa-init: got period size 1024
alsa: 48000 Hz/2 channels/4 bpf/32768 bytes buffer/Signed 16 bit Little
Endian
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
AO: Description: ALSA-0.9.x-1.x audio output
AO: Author: Alex Beregszaszi, Zsolt Barat <joy@xxxxxxxxxxxxxxxxx>
AO: Comment: under developement
Building audio filter chain for 44100Hz/2ch/s16le ->
48000Hz/2ch/s16le...
[dummy] Was reinitialized: 44100Hz/2ch/s16le
[libaf] Adding filter lavcresample
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[dummy] Was reinitialized: 48000Hz/2ch/s16le
Starting playback...
[libaf] Reallocating memory in module lavcresample, old len = 0, new len
= 34974
Increasing filtered audio buffer size from 0 to 34932
v4l2: going to capture
*** [menu] Exporting mp_image_t, 640x480x16bpp YUV packed, 614400 bytes
*** [vo] Exporting mp_image_t, 640x480x16bpp YUV packed, 614400 bytes
Unicode font: 4959 glyphs.
Unicode font: 4959 glyphs.
Selected channel: R1 (freq: 49.750)0.093 788/788 0% 1% 0.5% 24
0
Current frequency: 796 (49.750)
Increasing filtered audio buffer size from 34932 to 34944
Increasing filtered audio buffer size from 34944 to 34984 0.5% 25
0
Selected channel: R2 (freq: 59.250)0.093 877/877 0% 1% 0.5% 29
0
Current frequency: 948 (59.250)
Increasing filtered audio buffer size from 34984 to 34988
Selected channel: R3 (freq: 77.250)0.093 941/941 0% 1% 0.5% 34
0
Current frequency: 1236 (77.250)
Selected channel: R4 (freq: 85.250)0.093 3042/3042 0% 1% 0.5% 38
0
Current frequency: 1364 (85.250)
Selected channel: R5 (freq: 93.250)
Current frequency: 1492 (93.250)
Selected channel: R6 (freq: 175.250).093 3227/3227 0% 1% 0.5% 43
0
Current frequency: 2804 (175.250)
Selected channel: R7 (freq: 183.250)
Current frequency: 2932 (183.250)
Selected channel: R8 (freq: 191.250)
Current frequency: 3060 (191.250)
Uninit audio filters...-0.000 ct: 0.093 3459/3459 0% 1% 0.5% 46
0
[libaf] Removing filter lavcresample
[libaf] Removing filter dummy
Uninit audio: pcm
Uninit video: raw
v4l2: 3628 frames successfully processed, -3623 frames dropped.
v4l2: up to 172 video frames buffered.
alsa-uninit: pcm closed
vo: uninit ...
Exiting... (Quit)
____________________________
Selected channel list: europe-east (including 133 channels) -- ???
I am in Canada using Rogers cable. I have tried both norm:ntsc and
ntsc-m.
P.S. I am starting a new thread because a lot of information has
changed since my original thread.
--
Regards Bill
Fedora 10, Gnome 2.24.3
Evo.2.24.5, Emacs 22.3.1
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
