On Sun, Apr 19, 2009 at 05:39:21PM +0200, fedora wrote: > Hi Dave > > /sbin/mii-tool > eth0: negotiated 100baseTx-FD, link ok Thanks for the reference. Man mii-tool says this utility does not cover 1G nics and is obsolete. It recommends ethtool instead. '/sbin/ethtool eth0' says that the ic is running at 100mb/s although it has 1G/s capability. So I am curious why the nic does not initialize to 1G or light up the port led on the 1G switch. > > > rpm -ql net-tools > /bin/dnsdomainname /bin/domainname > /bin/hostname > /bin/netstat > /bin/nisdomainname > /bin/ypdomainname > /etc/ethers > /etc/netplug > /etc/netplug.d > /etc/netplug.d/netplug > /etc/netplug/netplugd.conf > /etc/rc.d/init.d/netplugd > /sbin/arp > /sbin/ether-wake > /sbin/ifconfig > /sbin/ipmaddr > /sbin/iptunnel > /sbin/mii-diag > /sbin/mii-tool > /sbin/nameif > /sbin/netplugd > /sbin/plipconfig > /sbin/route > /sbin/slattach > /usr/share/doc/net-tools-1.60 > /usr/share/doc/net-tools-1.60/COPYING > /usr/share/doc/net-tools-1.60/README.netplugd > /usr/share/doc/net-tools-1.60/TODO.netplugd > /usr/share/locale/cs/LC_MESSAGES/net-tools.mo > /usr/share/locale/de/LC_MESSAGES/net-tools.mo > /usr/share/locale/et_EE/LC_MESSAGES/net-tools.mo > /usr/share/locale/fr/LC_MESSAGES/net-tools.mo > /usr/share/locale/pt_BR/LC_MESSAGES/net-tools.mo > /usr/share/man/de/man1/dnsdomainname.1.gz > /usr/share/man/de/man1/domainname.1.gz > /usr/share/man/de/man1/hostname.1.gz > /usr/share/man/de/man1/nisdomainname.1.gz > /usr/share/man/de/man1/ypdomainname.1.gz > /usr/share/man/de/man5/ethers.5.gz > /usr/share/man/de/man8/arp.8.gz > /usr/share/man/de/man8/ifconfig.8.gz > /usr/share/man/de/man8/netstat.8.gz > /usr/share/man/de/man8/plipconfig.8.gz > /usr/share/man/de/man8/route.8.gz > /usr/share/man/de/man8/slattach.8.gz > /usr/share/man/fr/man1/dnsdomainname.1.gz > /usr/share/man/fr/man1/domainname.1.gz > /usr/share/man/fr/man1/hostname.1.gz > /usr/share/man/fr/man1/nisdomainname.1.gz > /usr/share/man/fr/man1/ypdomainname.1.gz > /usr/share/man/fr/man5/ethers.5.gz > /usr/share/man/fr/man8/arp.8.gz > /usr/share/man/fr/man8/ifconfig.8.gz > /usr/share/man/fr/man8/netstat.8.gz > /usr/share/man/fr/man8/plipconfig.8.gz > /usr/share/man/fr/man8/route.8.gz > /usr/share/man/fr/man8/slattach.8.gz > /usr/share/man/man1/dnsdomainname.1.gz > /usr/share/man/man1/domainname.1.gz > /usr/share/man/man1/hostname.1.gz > /usr/share/man/man1/nisdomainname.1.gz > /usr/share/man/man1/ypdomainname.1.gz > /usr/share/man/man5/ethers.5.gz > /usr/share/man/man8/arp.8.gz > /usr/share/man/man8/ether-wake.8.gz > /usr/share/man/man8/ifconfig.8.gz > /usr/share/man/man8/mii-diag.8.gz > /usr/share/man/man8/mii-tool.8.gz > /usr/share/man/man8/nameif.8.gz > /usr/share/man/man8/netplugd.8.gz > /usr/share/man/man8/netstat.8.gz > /usr/share/man/man8/plipconfig.8.gz > /usr/share/man/man8/route.8.gz > /usr/share/man/man8/slattach.8.gz > /usr/share/man/pt/man1/dnsdomainname.1.gz > /usr/share/man/pt/man1/domainname.1.gz > /usr/share/man/pt/man1/hostname.1.gz > /usr/share/man/pt/man1/nisdomainname.1.gz > /usr/share/man/pt/man1/ypdomainname.1.gz > /usr/share/man/pt/man8/arp.8.gz > /usr/share/man/pt/man8/ifconfig.8.gz > /usr/share/man/pt/man8/netstat.8.gz > /usr/share/man/pt/man8/route.8.gz > > > suomi > > > > Dave Feustel wrote: >> I just got a gigabyte switch for my home network and I still >> haven't figured out how to display the tx/rx data rate of each >> nic connected to the switch. Also, the leds for the F9 computer >> is not lighted on the switch, although F9 is accessing the >> internet. >> >> What command will display the rx/tx data rates of each nic? >> >> Thanks. >> > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
