On Thu, 09 Apr 2009 07:01:31 -0700 Peter J. Stieber wrote: > I didn't even know there was an ISA adapter in the machine, but the > values all look wacky. Yea, the sensor values are almost always wacky. None of the board manufacturers actually document how they have the sensor chips hooked up, so the defaults are always sort of guesses based on dribs and drabs of info folks have managed to collect about how any given sensor chip is typically used on a motherboard. > Here is the output of hddtemp > > hddtemp --unit=F SATA:/dev/sda SATA:/dev/sdb SATA:/dev/sdc > /dev/sda: Maxtor 6Y160M0: 77°F > /dev/sdb: WDC WD2500KS-00MJB0: 96°F > /dev/sdc: ST3750330AS: 80°F My sata disks seems to run around 39-42C which is actually higher that those if you do the conversion, so the disk temps look OK. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
