Craig White wrote:
On Tue, 2009-03-17 at 09:49 +0000, psmith wrote:
Craig White wrote:
On Mon, 2009-03-16 at 22:25 +0000, psmith wrote:
Craig White wrote:
On Mon, 2009-03-16 at 19:14 +0000, psmith wrote:
Gordon Messmer wrote:
M A Young wrote:
I recommend that you do a text based install (add text to the boot
line), and once you have it installed, boot to a text console (add 3
to the boot line), then add Option "NoAccel" "true" to the Device
section of /etc/X11/xorg.conf
I'm curious whether it's necessary to disable acceleration entirely,
or simply revert to the older XAA method. On my Thinkpad X40, the
Intel video driver in F10 had significant problems, where the driver
on F9 was fine. I could either use XAA or revert to the older driver
to get proper rendering.
I've attached a minimal xorg.conf. I believe you can save it to
/etc/X11 to test each of the options individually. Try disabling
accel, and then try using XAA (both options are in the file). Let us
know what kind of results you get, and then track down one of the
bugzilla reports on this subject (I know a few are open) and add your
information.
here is the pertinant section of the xorg.conf for my aspire one which
has intel gfx, this is on F10 and it works perfectly
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GME Express Integrated Graphics Controller"
VideoRam 229376
Option "MonitorLayout" "LVDS,VGA"
Option "Clone" "true"
Option "AccelMethod" "EXA"
Option "MigrationHeuristic" "greedy"
Option "CacheLines" "1980"
BusID "PCI:0:2:0"
EndSection
----
you haven't by any chance figured out how to get LVDS to use a larger
virtual screen - say 1024 x 768 have you? I've been unable to do that on
my Aspire One.
Craig
no sorry craig, i think i remember reading somewhere that the only way
to get the "Virtual" setting to work is to pass the "NoAccel" "true"
option but i've not tried it
----
would you have "NoAccel" "true" instead of "AccelMethod" "EXA" ? is that
the idea?
Craig
yeah that's it, let me know if it works out
----
nothing I have done so far has allowed me to have a virtual screen on
the LVDS larger than 1024x600 and the above didn't work.
Presently xorg.conf on my Aspire One looks like this...
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105+inet"
Option "XkbLayout" "us"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GME Express Integrated Graphics Controller"
VideoRam 229376
Option "MonitorLayout" "LVDS,VGA"
Option "Clone" "true"
# Option "AccelMethod" "EXA"
Option "NoAccel" "true"
Option "MigrationHeuristic" "greedy"
Option "CacheLines" "1980"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "1024x600"
Virtual 2048 2048
EndSubSection
EndSection
and I have had various sizes in 'Virtual' from 1024 768 and 1280 1024
and have tried disabling the 'Modes' line altogether or just had it with
"1280x1024" (my 19" display) but nothing has worked. I have been mostly
testing things with just the built-in display because that is where I
want the larger virtual screen.
;-(
Craig
sorry to hear that craig, but have no ther options for you to try. maybe
an email to the xorg or intel driver mailing list might get you a
solution, if you do figure it out be sure to let us know :)
phil
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
