Marko Vojinovic píše v St 11. 03. 2009 v 18:59 +0100: > After the latest updates: > > Mar 10 14:10:11 Updated: 1:NetworkManager-glib-0.7.0.99-1.fc10.x86_64 > Mar 10 14:10:17 Updated: 1:NetworkManager-0.7.0.99-1.fc10.x86_64 > Mar 10 14:10:56 Updated: 1:NetworkManager-gnome-0.7.0.99-1.fc10.x86_64 > Mar 10 14:11:01 Updated: 1:NetworkManager-openvpn-0.7.0.99-1.fc10.x86_64 > Mar 10 14:11:05 Updated: 1:NetworkManager-vpnc-0.7.0.99-1.fc10.x86_64 > > NetworkManager stopped connecting via eth0. Wireless still works, wired > worked before the updates, as "auto eth0" or something like that. Now > there is no such option, and everything regarding eth0 in the > configuration gui is greyed out. > > When I plug in the network cable, /var/log/messages says that famous > cryptic message that NM changed state from 2 to 3 and such, and that's it. > No activity regarding dhcp or other usual stuff. > > If I setup system-config-network to turn off "conntroled by NM" switch for > eth0 and do a service network restart, the wired network starts to work > correctly, so it is not a hardware problem. > > My lspci -v says: > 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E > Gigabit Ethernet Controller (rev 14) > Subsystem: Fujitsu Siemens Computers Device 110f > Flags: bus master, fast devsel, latency 0, IRQ 17 > Memory at f8000000 (64-bit, non-prefetchable) [size=16K] > I/O ports at 3000 [size=256] > [virtual] Expansion ROM at f2000000 [disabled] [size=128K] > Capabilities: [48] Power Management version 3 > Capabilities: [50] Vital Product Data <?> > Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ > Count=1/1 Enable- > Capabilities: [e0] Express Legacy Endpoint, MSI 00 > Capabilities: [100] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr+ > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr+ > AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap- > ChkEn- > Kernel driver in use: sky2 > Kernel modules: sky2 > > Does anybody know the cause of the problem and a possible fix/workaround? > Up to now NM worked flawlessly on my laptop for both wired and wireless > and I find it more convenient than the old network service, but... It is known problem, yum update (from today) fix it. Pavel -- Pavel Lisy <pali@xxxxxxxx> T-MAPY spol. s r.o. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
