On Tue, 2009-03-10 at 10:56 -0500, Dave Ihnat wrote: > I'm rather flummoxed by your problems. I've been using labels--almost > always Avery--in inkjets and lasers for years. Many brands of > printers. Envelopes, too. It all became too much of a pain... I could, about 80% of the time, get labels to go through one of my old inkjets, before it died. But, it didn't always print in the same place (vertical-wise). And, thanks to programming idiots who play silly games with DPI, it was impossible to print where I wanted. i.e. On my much older computer and printer, if I said a box started 12 cm down, and 5 cm across, was 3 cm high and 5 cm wide, then it printed exactly as I specified. On the newer gear, where it threw away standards, and turned them into arbitrary unspecified figures, I had to waste paper doing test prints and making tiny unpredictable adjustments, to get things to print right. I really hate pinheads who stuff things up until it *seems* to work for them, without understanding what they're doing. It stuffs things up for everyone *else* in an unmanageable way. -- [tim@localhost ~]$ uname -r 2.6.27.15-78.2.23.fc9.i686 Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
