Re: LAN addresses in IPv6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Timothy Murphy wrote:
Anthony Messina wrote:

look into radvd

Thanks, I am looking into radvd .
Unfortunately, its exact purpose is not clear to me.
Is it an essential part of an IPv6 system?

Again this all comes down to what sixxes.net is providing you. Did they allocate a prefix to you? If not then you will have no use for radvd. If they did you have a number of steps to perform.

this site is helpful: http://www.wsrcc.com/wolfgang/fedora/ipv6-tunnel.html

I had looked at this.
Unfortunately it fell into the category of documents
intended for somebody very different to myself,
possibly belonging to a different species.

Eg there is some discussion of radvd.conf ,
but it never said that one should install the radvd package.
(It seems to be assumed that everyone knows that radvd is.)

Also I have no idea what to substitute for Y...Y in
prefix YYYY:YYYY:YYYY:0000::/64 # advertise net 0 of 65536

On your tunnel termination box, ie your IPv6 gateway.

You have to allow IPv6 forwarding and your ip6tables has to be set up accordingly, or disable it. You need to set up a static IPv6 address for the inward facing ethernet (or WiFi) interface on this system, with the lower 64 bits the assigned prefix. The higher 64 bits can be anything you choose, there is a way to map the 48 bit mac addr into these 64 bits, but I advise against it. Plan for the situation where the gateway's internal MAC address changes. This is one of my 'issues' with the who IPv6ops area.

No your entry into radvd.conf is relatively easy:

interface eth1
{
AdvSendAdvert on;
MinRtrAdvInterval 30;
MaxRtrAdvInterval 100;
prefix 1:2:3:4::/64
{
AdvOnLink on;
AdvAutonomous on;
AdvRouterAddr off;
};
route ::/0
{
};
};


Where eth1 is your internal interface name, and 1:2:3:4:: is the assigned prefix.

If your gateway has multiple interfaces or is vlaned, that is easy to setup, but then you need a larger prefix allocation like a /60. If you need mobility, I can provide the information for that too, as in my testbed, I have multiple vlans and move systems by moving them across vlans. If you have an internal router, then that is where you do all this and then you need IPv6static routing. I am doing that and can show how that needs to be set up.


--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux