---- Tim <ignored_mailbox@xxxxxxxxxxxx> wrote:
> On Fri, 2009-03-06 at 11:43 -0500, Steve wrote:
> > kernel: end_request: I/O error. dev sr0, sector 0
> > kernel: Buffer I/O error on device sr0, logical block 0
> > <repeat to logical block 7>
> > <repeat for other sectors>
> >
> > After some investigation, I have found that I only get these errors if
> > I boot with a CD in the drive.
> > Then I found that they also appear in the logs whenever a CD in
> > inserted into the drive.
>
> I see something like that all the time when there's a CD in the drive.
> The auto-mounter attempts to read a file system from the disc, and can't
> (e.g. because it's an audio disc), and those are the error responses
> about the failure. If it can read the disc (often, it takes a few
> attempts, while the mechanics of reading a disc are run through; focus,
> positioning the laser in the right spot..), or it completely aborts, the
> error messages stop.
>
> What type of CD is in your drive?
$ sudo lshw
...
*-cdrom
description: DVD writer
product: DVD+-RW GSA-H31L
vendor: HL-DT-ST
physical id: 1
bus info: scsi@1:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/scd0
logical name: /dev/sr0
version: W616
serial: [HL-DT-STDVD+-RW GSA-H31LW61606/11/02
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 status=ready
*-medium
physical id: 0
logical name: /dev/cdrom
Steve
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
