Hello List, I'm having problems with "Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)". Most of the time it works ok, but sometimes the connection just crashes. Now the last time I saw about 760 million errors appearing on the interface. When I checked /var/log/messages, I came across the following stacktrace: NETDEV WATCHDOG: eth1: transmit timed out ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:222 dev_watchdog+0x92/0xe3() (Not tainted) Modules linked in: appletalk it87 hwmon_vid fuse sunrpc ipt_REJECT ipt_ULOG xt_limit ipt_LOG xt_tcpudp xt_state ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_filter ip_tables x_tables ipv6 cpufreq_ondemand powernow_k8 dm_multipath snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_nforce2 snd_page_alloc e1000 snd_hwdep i2c_core k8temp usb_storage snd parport_pc hwmon parport forcedeth soundcore pcspkr floppy sg pata_amd dm_snapshot dm_zero dm_mirror dm_log dm_mod pata_acpi ata_generic sata_nv libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] Pid: 0, comm: swapper Not tainted 2.6.26.8-57.fc8 #1 [<c0428892>] warn_on_slowpath+0x47/0x72 [<c041f96d>] ? try_to_wake_up+0x1b3/0x1bd [<c041f982>] ? default_wake_function+0xb/0xd [<c0438d94>] ? autoremove_wake_function+0xf/0x33 [<c041d786>] ? __wake_up_common+0x2f/0x5a [<c041f4f1>] ? __wake_up+0x31/0x3b [<c043633e>] ? insert_work+0x4a/0x50 [<c04365f0>] ? __queue_work+0x28/0x2d [<c043664f>] ? queue_work+0x36/0x40 [<c0436668>] ? schedule_work+0xf/0x11 [<c05d0935>] dev_watchdog+0x92/0xe3 [<c04306d6>] run_timer_softirq+0x124/0x18c [<c05d08a3>] ? dev_watchdog+0x0/0xe3 [<c05d08a3>] ? dev_watchdog+0x0/0xe3 [<c042cdcf>] __do_softirq+0x6d/0xdf [<c0406e5e>] do_softirq+0x6c/0xa9 [<c042cd2f>] irq_exit+0x38/0x6b [<c041494c>] smp_apic_timer_interrupt+0x6e/0x7e [<c040378d>] ? default_idle+0x0/0x58 [<c0405654>] apic_timer_interrupt+0x28/0x30 [<c040378d>] ? default_idle+0x0/0x58 [<c0419653>] ? native_safe_halt+0x5/0x7 [<c04037bd>] default_idle+0x30/0x58 [<c04036cc>] cpu_idle+0xae/0xce [<c06217d6>] rest_init+0x4e/0x50 ======================= ---[ end trace 0c5cc5d9805576cc ]--- e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang Tx Queue <0> TDH <4000fc> TDT <400054> next_to_use <54> next_to_clean <f3> buffer_info[next_to_clean] time_stamp <5822fb> next_to_watch <f3> jiffies <582d9d> next_to_watch.status <0> I'm running Fedora 8, kernel version 2.6.26.8-57.fc8. Does anyone else have a similar problem with this type of card/module? Regards, Gijs -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
