Re: F10 post installation kernel issue?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Daniel B. Thurman wrote:
Rick Stevens wrote:
Daniel B. Thurman wrote:
Rick Stevens wrote:
Daniel B. Thurman wrote:
Daniel B. Thurman wrote:

First time F10 install went well.  One thing I did
differently in installing F10 was to:

1) Use the Volume based filesystems
2) Enabled disk encryption

I noticed that on every reboot, one must enter the password
long before seeing a grub display.  Hmm...  maybe for a server
this is not the way to go, but for a workstation, it's probably ok.

Anyway, the initial kernel I started with is:
(1) kernel-2.6.27.5-117.fc10.i686

I proceeded to get the latest updates and this was approx. 1 week ago.

I later added programs I wanted installed, configured the services I wanted, etc., etc., and everything went well. I was able to reboot, no problems.

But then a few days later, more updates came through, but specifically
a new kernel was added:
(2) kernel-2.6.27.9-159.fc10.i686

Rebooting, I got the messages:
======================
ata1: ACPI get timing mode failed (AE 0x300d)
Loading /lib/kdb/Keymaps/i386/qwerty/us.map

Eh? Sure that's not "/lib/kbd/keymaps/i386/qwerty/us.map" (/lib/kbd NOT
/lib/kdb and no capital K)?

If what you posted is what's really being displayed, then we have
serious problems.  The correct directory is provided by kbd RPM.



[hang]

So, I never got to the point where I needed to enter
the encrypted disk password for continuance.

To be sure, I rebooted back to the original kernel (1),
and it booted just fine.  Leaving it there, I continued using
the system, but got yet another kernel update:
(3) kernel-2.6.27.12-170.2.5.fc10.i686

Same problem reported in (2) above.  So I am still
stuck at using my initial kernel at (1).

Is there anything I can do or to check to understand why
I am not able to use the latest kernels?

If the system is looking for the keymap you've shown, it won't find it,
the console won't be set up and things will come to a screeching halt.
I run 64-bit kernels so I can't test it and I don't know where it's
getting that path from.  I have run all the kernels you show and they
run fine here.  None ask for that funky keymap path.
I double-checked and got that path wrong initially.
The correct path shown on boot up (but appears ONLY
with the later newer kernels) are:

/lib/kbd/keymaps/i386/qwerty/us.map

It still hangs.  The interesting thing is, as I said, I can
boot with the first kernel (1) installed but not the ones
following.  Still scratching my head...

Ok, hmmm.  It looks like the initrd images didn't get built right.  Boot
up under the kernel that works, then as root:

    # cd /boot
    # mkinitrd -f -v initrd-2.6.27.12-170.2.5.fc10.i686.img
        2.6.27.12-170.2.5.fc10.i686

(the second and third lines should be ONE line...my mailer is wrapping
them)

Then try rebooting using that -170 kernel again.  The keymaps and things
actually are in the initrd image as well as the main system.  See if
that does the job.
Did what you suggested and it does not change anything.  Still hangs.
I tried autorelabel for SeLinux just in case, no change.  It is subjective,
but could having the filesystem encrypted be a problem?

I've heard of issues regarding encrypted filesystems.  I'm pretty sure
there's a thread on it in this forum somewhere.  It may be that the
initrd didn't get built with the cryptographic stuff.  I don't think
mkinitrd is smart enough to realize it needs the crypto stuff from the
/etc/modprobe.conf or /etc/fstab and you have to force feed it that
stuff with "--with=module" on the command line.

>                                                            Did you try
to see if you can run all the kernel version under an encrypted filesystem?

I don't use encrypted filesystems myself, so I'm going to have to bow
out on any of that stuff. However, when you built the initrd, I recommended you use the "-v" flag. You should have seen it include the
crypto modules along with the "dm-" stuff.  If not...well, that may be
your problem.

I am now testing to see if removing any packages (one by one) has any effect,
a shot in the dark, but I do not know what else to do.

Don't think that's it.  It's quitting long before any other stuff is
loaded up...it's definitely having issues with the root filesystem,
and I'm willing to bet it is this crypto stuff.  Check the archives of
this list to find the thread(s) regarding it.
----------------------------------------------------------------------
- Rick Stevens, Systems Engineer                      ricks@xxxxxxxx -
- AIM/Skype: therps2        ICQ: 22643734            Yahoo: origrps2 -
-                                                                    -
-  Tempt not the dragons of fate, since thou art crunchy and taste   -
-                         good with ketchup.                         -
----------------------------------------------------------------------

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux