Maybe this can guide you: http://www-personal.umich.edu/~hnarayan/maxtor-harddrive-linux.html Gustavo Eli Pelcastre H. > I have a 200 MiB Maxtor HD that isn't being seen by the OS. I have it > plugged > into the system through an EIDE/USB converter hub. It appears that the > drive > isn't recognized, but the hub device is. > > gparted doesn't see the drive at all. Here are the outputs of lsusb and > lspci. > > root@satyr:~# lsusb > Bus 004 Device 010: ID 152d:2338 JMicron Technology Corp. / JMicron USA > Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge > Bus 004 Device 001: ID 0000:0000 > Bus 003 Device 002: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000 > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 002: ID 0d3d:0001 Tangtop Technology Co., Ltd > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 004: ID 03f0:4b11 Hewlett-Packard > Bus 001 Device 003: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse > Bus 001 Device 001: ID 0000:0000 > root@satyr:~# > > root@satyr:~# lspci > 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM > Controller/Host-Hub Interface (rev 01) > 00:02.0 VGA compatible controller: Intel Corporation > 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) > 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) > 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) > 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) > 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 > EHCI Controller (rev 01) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81) > 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC > Interface Bridge (rev 01) > 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller > (rev 01) > 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) > SMBus Controller (rev 01) > 01:01.0 Modem: Broadcom Corporation BCM4212 v.90 56k modem > 01:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03) > 01:02.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port > 01:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (LOM) > Ethernet Controller (rev 81) > root@satyr:~# > > I've jumpered the drive and brought it up in every possible permutation. > I > also tried mounting the drive as the slave on both primary and secondary > EIDE > cables. > > I'm hoping that perhaps someone here can help me out with this. > > Thanks in advance, > > JL > > -- > JL <lists@xxxxxxxx> > This message optimized for teletypes. > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > Guidelines: > http://fedoraproject.org/wiki/Communicate/MailingListGuidelines > -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
