Alain Roger wrote:
Hi,
i have setup a static IP for my F10 computer (which will be use later
as DB server for test development).
therefore i modify the following 3 files:
/etc/sysconfig/networking/devices/ifcfg-eth0
/etc/sysconfig/networking/profiles/default/ifcfg-eth0
/etc/sysconfig/network-scripts/ifcfg-eth0
i setup my mask to 255.255.255.0 as usual and after i reboot F10.
after login as user, F10 as setup eth0 inactive. when i press the
button activate, eth0 is activated but the mask turns to my default
gateway address... and internet does not work.
where is the problem ?
i'm sure that this IP address is free and works if i use it on windows OS.
thx a lot.
--
Alain
-----------------------------------------------------------
Windows XP x64 SP2 / Fedora 10 KDE 4.2
PostgreSQL 8.3.5 / MS SQL server 2005
Apache 2.2.10
PHP 5.2.6
C# 2005-2008
You only need to change /etc/sysconfig/network-scripts/ifcfg-eth0 .
Check into /etc/resolv.conf for the correct DNS. This is where your DNS
is setup to get you on the Internet.
Are you using a gateway router or direct to the DSL box ?
Here is a working /etc/sysconfig/network-scripts/ifcfg-eth0 to compare by;
After all changes are made , restart your computer, all damons will also
be restarted
DEVICE=eth0
ONBOOT=yes
TYPE=Ethernet
BOOTPROTO=static
IPADDR=192.168.1.254 # your static IP here
NETMASK=255.255.255.0
NETWORK=
BROADCAST=192.168.1.255
GATEWAY=192.168.1.1 # which is a router
HWADDR=00:16:EC:69:37:55 # put your own MAC adress here
DNS1=
IPV6INIT=no
USERCTL=no
PEERDNS=yes
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines