Re: F10 - No sound on my OQO

[Robert Moskowitz <rgm@xxxxxxxxxxxxxxx>]

Nigel Henry wrote:
> On Thursday 04 December 2008 22:44, Robert Moskowitz wrote:
>   
> > Nigel Henry wrote:
> >     
> > > On Thursday 04 December 2008 18:15, Robert Moskowitz wrote:
> > >       
> > > > First, I have sound on another OQO running Centos 5.2 (ALSA 1.0.14 I
> > > > believe).
> > > >
> > > > Now here is some forensics:
> > > >
> > > >
> > > >  From lspci -v:
> > > >
> > > > 02:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio
> > > > Controller (rev 10)
> > > >         Subsystem: VIA Technologies, Inc. VIA High Definition Audio
> > > > Controller
> > > >         Flags: fast devsel, IRQ 17
> > > >         Memory at c2000000 (64-bit, non-prefetchable) [size=16K]
> > > >         Capabilities: [50] Power Management version 2
> > > >         Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> > > > Count=1/1 Enable-
> > > >         Capabilities: [70] Express Root Complex Integrated Endpoint, MSI
> > > > 00 Capabilities: [100] Virtual Channel <?>
> > > >         Kernel modules: snd-hda-intel
> > > >
> > > > cat /proc/asound/version
> > > >
> > > > Advanced Linux Sound Architecture Driver Version 1.0.17.
> > > >
> > > > cat /proc/asound/cards
> > > >
> > > > --- no soundcards ---
> > > >
> > > >
> > > > OOPS!!!! Why no sound card?
> > > >         
> > > Hi Robert.
> > >
> > > What exactly is an OQO?
> > >       
> > www.oqo.com
> >
> > I have the model 2 without the touchscreen or WiMax.
> >
> >     
> > > No sound card, means just that. the soundcard can't be detected.
> > >
> > > You may find that the snd modules are loaded. Try the command as below,
> > > and post back the output.
> > > /sbin/lsmod | grep snd
> > >       
> > snd_hda_intel 351124 0
> > snd_seq_dummy 6660 0
> > snd_seq_oss 30364 0
> > snd_seq_midi_event 9600 1 snd_seq_oss
> > snd_seq 48576 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
> > snd_seq_device 10124 3 snd_seq_dummy,snd_seq_oss,snd_seq
> > snd_pcm_oss 42496 0
> > snd_mixer_oss 16896 1 snd_pcm_oss
> > snd_pcm 65924 2 snd_hda_intel,snd_pcm_oss
> > snd_timer 22024 2 snd_seq,snd_pcm
> > snd_page_alloc 11016 2 snd_hda_intel,snd_pcm
> > snd_hwdep 10500 1 snd_hda_intel
> > snd 50616 10
> > snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,
> > snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep soundcore 9416 1 snd
> >
> >     
> > > Which make/model of Laptop/PC is this? The OQO bit is a bit confusing.
> > >       
> > I have 4 of these to be a portable test/demo bed. 3 of them have Centos
> > 5.2 on them. One has F10. Interesting comparison of what works for
> > Centos and what with F10. Sound is one of the items working fine with
> > the Centos installs.
> >
> >     
> > > You could download the script from the link below, save it as
> > > alsa-info.sh, make it executable, then run it as ./alsa-info.sh. Running
> > > this script will upload info about your machine, and specifically sound
> > > related stuff to a website. Post back the link to the site, and I, and
> > > hopefully others can examine your problem.
> > >
> > > http://hg.alsa-project.org/alsa/raw-file/tip/alsa-info.sh
> > >       
>
> Sound not working on F10. See link to alsa-info.sh output below.
>   
> > http://www.alsa-project.org/db/?f=a984f3d7859f7c239c6ecf2cbf5614a1fbdd6cff
> >     
>
> Hi Robert.
>
> Would you please run the alsa-info.sh script on one of your Centos 5.2 
> machines, where the sound is working ok. Don't trim anything on your reply, 
> but just add the new link, identifying it as, "Sound working with Centos 5.2. 
> See link to alsa-info.sh output below".
http://www.alsa-project.org/db/?f=5d592ffd6dd37b033a165c4c4701651b84d76155

Thank you for your help on this.


--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines