Re: Fedora 10 Live CD hangs at boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Antonio Olivares wrote:
>
> --- On Fri, 11/28/08, Konstantin Svist <fry.kun@xxxxxxxxx> wrote:
>
>   
>> From: Konstantin Svist <fry.kun@xxxxxxxxx>
>> Subject: Fedora 10 Live CD hangs at boot
>> To: "Community assistance, encouragement, and advice for using Fedora." <fedora-list@xxxxxxxxxx>
>> Date: Friday, November 28, 2008, 11:01 PM
>> Hi all,
>>
>> I just downloaded a copy of F10 x86_64 Live KDE CD.
>> When trying to start on a newly-built computer, it gets
>> into X (I can
>> move the mouse) and a progress bar goes up. At some point,
>> though, the
>> computer freezes and I can't do anything but reboot at
>> that point.
>>
>> CPU: q6600
>> Mobo: Asus P5N7A-VM
>> Video: ATI X800 GT
>>
>> I've tried using the internal video card, but
>> Xorg.0.log says the card
>> is unsupported (it's some nVidia with shared RAM)
>> I've tried disconnecting the hard drive - didn't
>> help, either.
>>
>> What else can I do?
>>
>> -- 
>>     
>
>
> You have the same problems as me :(
> I blacklisted r8169 module in /etc/modprobe.d/blacklist file, but still my machine runs for a while and then suddenly freezes with no apparent reason :(  It is an asus motherboard with integrated video on the motherboard, here's lspci
>
> 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
> 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
> 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3)
> 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
> 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
> 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
> 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
> 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
> 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
> 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
> 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
> 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
> 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
> 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
> 01:05.0 VGA compatible controller: ATI Technologies Inc RS690 [Radeon X1200 Series]
> 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
> 03:06.0 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem (rev 04)
>
> What is your lspci, is it about the same as this one?
>
> Regards,
>
> Antonio 
>
>   

I've tried to blacklist r8169 but that did nothing..

Here's my lspci:

00:00.0 Host bridge: nVidia Corporation Device 0a80 (rev b1)
00:00.1 RAM memory: nVidia Corporation Device 0a88 (rev b1)
00:03.0 ISA bridge: nVidia Corporation Device 0aac (rev b2)
00:03.1 RAM memory: nVidia Corporation Device 0aa4 (rev b1)
00:03.2 SMBus: nVidia Corporation Device 0aa2 (rev b1)
00:03.3 RAM memory: nVidia Corporation Device 0a89 (rev b1)
00:03.4 RAM memory: nVidia Corporation Device 0a98 (rev b1)
00:03.5 Co-processor: nVidia Corporation Device 0aa3 (rev b1)
00:04.0 USB Controller: nVidia Corporation Device 0aa5 (rev b1)
00:04.1 USB Controller: nVidia Corporation Device 0aa6 (rev b1)
00:06.0 USB Controller: nVidia Corporation Device 0aa7 (rev b1)
00:06.1 USB Controller: nVidia Corporation Device 0aa9 (rev b1)
00:08.0 Audio device: nVidia Corporation Device 0ac0 (rev b1)
00:09.0 PCI bridge: nVidia Corporation Device 0aab (rev b1)
00:0a.0 Ethernet controller: nVidia Corporation Device 0ab0 (rev b1)
00:0b.0 IDE interface: nVidia Corporation Device 0ab4 (rev b1)
00:0c.0 PCI bridge: nVidia Corporation Device 0ac4 (rev b1)
00:15.0 PCI bridge: nVidia Corporation Device 0ac6 (rev b1)
00:16.0 PCI bridge: nVidia Corporation Device 0ac7 (rev b1)
02:00.0 VGA compatible controller: ATI Technologies Inc R423 UI [Radeon
X800PRO (PCIE)]
02:00.1 Display controller: ATI Technologies Inc R423 UI [Radeon X800PRO
(PCIE)] (Secondary)
04:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller



Thanks,
Konstantin

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux