On Thu, Nov 27, 2008 at 6:48 PM, Jim van Wel <jim@xxxxxxxxxxxxx> wrote:
> My bad,
>
> I meant for the Virtual line:
>
> Virtual 1024 768
>
>> Hi,
>>
>> Alright, well, let's try this:
>>
>> In your new xorg file change this:
>>
>> #Option "NoAccel"
>>
>> To:
>>
>> Option "NoAccel"
>>
>> And:
>>
>>> SubSection "Display"
>>> Viewport 0 0
>>> Depth 24
>>> EndSubSection
>>
>> To:
>>
>> SubSection "Display"
>> Viewport 0 0
>> Depth 24
>> Virtual 1024 1024
>> EndSubSection
Hi Guys,
Thanks a lot.. KDE looks cool. Will explore other feature
now. Once again thanks a lot.
-Anoop
>>
>> And reload/reboot. Hope it works!
>>
>>> Hi Steve and Jim,
>>> I was able to boot into shell with run level 3.
>>> I have already updated my system by doing 'yum update'.
>>>
>>> On Thu, Nov 27, 2008 at 5:29 PM, Jim van Wel <jim@xxxxxxxxxxxxx> wrote:
>>>> Hi there,
>>>>
>>>> Got the same issue. Fix was easy.
>>>>
>>>> X -configure
>>>>
>>>> Makes a xorg.conf file in /etc/X11
>>> :( It is not creating file in /etc/X11. It creating a file
>>> '/root/xorg.conf.new' and asking me to test with command:
>>> X -config <filename>
>>> Anyway this is not working.
>>>
>>> My system's configuration is:
>>> Graphics Adapter: Intel 82845G
>>> Monitor: ViewSonic VE510s
>>> Motherboard: Intel D845GVSR
>>>
>>> I have collected the log while running 'X -configure'
>>>
>>> [...snip...]
>>> X.Org X Server 1.5.3
>>> Release Date: 5 November 2008
>>> X Protocol Version 11, Revision 0
>>> Build Operating System: Linux 2.6.18-92.1.10.el5 i686
>>> Current Operating System: Linux localhost.localdomain
>>> 2.6.27.5-117.fc10.i686 #1 SMP Tue Nov 18 12:19:59 EST 2008 i686
>>> Build Date: 16 November 2008 08:29:02PM
>>> Build ID: xorg-x11-server 1.5.3-5.fc10
>>> Before reporting problems, check http://wiki.x.org
>>> to make sure that you have the latest version.
>>> Markers: (--) probed, (**) from config file, (==) default setting,
>>> (++) from command line, (!!) notice, (II) informational,
>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>>> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 27 23:27:46 2008
>>> List of video drivers:
>>> i740
>>> rendition
>>> siliconmotion
>>> voodoo
>>> ati
>>> savage
>>> i810
>>> sis
>>> neomagic
>>> trident
>>> mga
>>> v4l
>>> openchrome
>>> nv
>>> i128
>>> vmware
>>> s3virge
>>> glint
>>> nouveau
>>> ast
>>> cirrus
>>> radeon
>>> tdfx
>>> apm
>>> r128
>>> intel
>>> geode
>>> sisusb
>>> ztv
>>> amd
>>> mach64
>>> dummy
>>> fbdev
>>> vesa
>>> (++) Using config file: "/root/xorg.conf.new"
>>>
>>>
>>> Xorg detected your mouse at device /dev/input/mice.
>>> Please check your config if the mouse is still not
>>> operational, as by default Xorg tries to autodetect
>>> the protocol.
>>>
>>> Your xorg.conf file is /root/xorg.conf.new
>>>
>>> To test the server, run 'X -config /root/xorg.conf.new'
>>>
>>> [...snip...]
>>>
>>>
>>> Here I am pasting my working Fedora 9 xorg.conf
>>>
>>> [...snip...]
>>> # Xorg configuration created by system-config-display
>>>
>>> Section "ServerLayout"
>>> Identifier "single head configuration"
>>> Screen 0 "Screen0" 0 0
>>> InputDevice "Keyboard0" "CoreKeyboard"
>>> EndSection
>>>
>>> Section "InputDevice"
>>>
>>> # keyboard added by rhpxl
>>> Identifier "Keyboard0"
>>> Driver "kbd"
>>> Option "XkbModel" "pc105"
>>> Option "XkbLayout" "us"
>>> EndSection
>>>
>>> Section "Device"
>>> Identifier "Videocard0"
>>> Driver "intel"
>>> EndSection
>>>
>>> Section "Screen"
>>> Identifier "Screen0"
>>> Device "Videocard0"
>>> DefaultDepth 24
>>> SubSection "Display"
>>> Viewport 0 0
>>> Depth 24
>>> Modes "1024x768" "800x600" "640x480"
>>> EndSubSection
>>> EndSection
>>>
>>> [...snip...]
>>>
>>>
>>> Here I am pasting my new Fedora 10 xorg.conf.new file generated by
>>> running 'X -configure'
>>>
>>> [...snip...]
>>>
>>> Section "ServerLayout"
>>> Identifier "X.org Configured"
>>> Screen 0 "Screen0" 0 0
>>> InputDevice "Mouse0" "CorePointer"
>>> InputDevice "Keyboard0" "CoreKeyboard"
>>> EndSection
>>>
>>> Section "Files"
>>> ModulePath "/usr/lib/xorg/modules"
>>> FontPath "catalogue:/etc/X11/fontpath.d"
>>> FontPath "built-ins"
>>> EndSection
>>>
>>> Section "Module"
>>> Load "glx"
>>> Load "dbe"
>>> Load "extmod"
>>> Load "dri"
>>> EndSection
>>>
>>> Section "InputDevice"
>>> Identifier "Keyboard0"
>>> Driver "kbd"
>>> EndSection
>>>
>>> Section "InputDevice"
>>> Identifier "Mouse0"
>>> Driver "mouse"
>>> Option "Protocol" "auto"
>>> Option "Device" "/dev/input/mice"
>>> Option "ZAxisMapping" "4 5 6 7"
>>> EndSection
>>>
>>> Section "Monitor"
>>> Identifier "Monitor0"
>>> VendorName "Monitor Vendor"
>>> ModelName "Monitor Model"
>>> EndSection
>>>
>>> Section "Device"
>>> ### Available Driver options are:-
>>> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>>> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>>> ### [arg]: arg optional
>>> #Option "NoAccel" # [<bool>]
>>> #Option "SWcursor" # [<bool>]
>>> #Option "ColorKey" # <i>
>>> #Option "CacheLines" # <i>
>>> #Option "Dac6Bit" # [<bool>]
>>> #Option "DRI" # [<bool>]
>>> #Option "NoDDC" # [<bool>]
>>> #Option "ShowCache" # [<bool>]
>>> #Option "XvMCSurfaces" # <i>
>>> #Option "PageFlip" # [<bool>]
>>> Identifier "Card0"
>>> Driver "intel"
>>> VendorName "Intel Corporation"
>>> BoardName "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics
>>> Device"
>>> BusID "PCI:0:2:0"
>>> EndSection
>>>
>>> Section "Screen"
>>> Identifier "Screen0"
>>> Device "Card0"
>>> Monitor "Monitor0"
>>> SubSection "Display"
>>> Viewport 0 0
>>> Depth 1
>>> EndSubSection
>>> SubSection "Display"
>>> Viewport 0 0
>>> Depth 4
>>> EndSubSection
>>> SubSection "Display"
>>> Viewport 0 0
>>> Depth 8
>>> EndSubSection
>>> SubSection "Display"
>>> Viewport 0 0
>>> Depth 15
>>> EndSubSection
>>> SubSection "Display"
>>> Viewport 0 0
>>> Depth 16
>>> EndSubSection
>>> SubSection "Display"
>>> Viewport 0 0
>>> Depth 24
>>> EndSubSection
>>> EndSection
>>>
>>> [...snip...]
>>>
>>> Thanks,
>>> Anoop
>>>
>>>>
>>>> Then try to change some settings like:
>>>>
>>>> Option "NoAccel"
>>>>
>>>> Or disable DRI etc...
>>>>
>>>> Before you can type these command's you need the console before it
>>>> crashes
>>>> to X.
>>>> You need to single boot the system (or init 3), so in grub, get the
>>>> line:
>>>>
>>>> In grub menu:
>>>> Type:
>>>> e
>>>> and e again on this line:
>>>> /vmlinuz-2.6.27.5-117.fc10.i686 ro root=UUID=blablabla rhgb single
>>>>
>>>> The Enter to save for this moment, and then type "b".
>>>>
>>>> If you have a Intel 965 and below chipset, remember, you virtual
>>>> desktop
>>>> cannot be larger then 2048X2048 with Acceleration. But it's maybe
>>>> easyer
>>>> if you send the hardware information.
>>>>
>>>> Good luck!
>>>>
>>>> Greetings,
>>>> Jim.
>>>>
>>>>> On Thu, Nov 27, 2008 at 1:52 PM, Anoop <anoop.chargotra@xxxxxxxxx>
>>>>> wrote:
>>>>>> Hi List,
>>>>>> I installed F10 in text mode from F10 DVD. Graphical mode
>>>>>> was giving issues, like sometimes system was freezing and on other
>>>>>> occasions I was just able to move the mouse cursor.
>>>>>> Installation went fine but when booted, I encountered same problem. I
>>>>>> could not see anything on console, though there was a progress bar at
>>>>>> the bottom of the screen going from left corner to right corner. I am
>>>>>> able to see login screen sometimes and on other occasions screen is
>>>>>> blur. Sometimes mouse gets stuck.
>>>>>> I was able to login once, but GUI freezed, though I was able to move
>>>>>> mouse cursor. After this, my login screen is not at all responsive.
>>>>>> It
>>>>>> is showing me two option. reboot or shutdown but I am not able to do
>>>>>> any.
>>>>>>
>>>>>> Till yesterday my F9 works like charm with full yum updates.
>>>>>>
>>>>>> Any help in this regard will be highly appreciated.
>>>>>>
>>>>>
>>>>> Can you do Alt+F2 and login to the console?
>>>>>
>>>>> If you can, install updates and reboot.
>>>>>
>>>>> Also, what hardware -- graphics, motherboard etc?
>>>>>
>>>>> Steve
>>>>>
>>>>> --
>>>>> fedora-list mailing list
>>>>> fedora-list@xxxxxxxxxx
>>>>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>>>>> Guidelines:
>>>>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>>>>>
>>>>
>>>> --
>>>> fedora-list mailing list
>>>> fedora-list@xxxxxxxxxx
>>>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>>>> Guidelines:
>>>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>>>>
>>>
>>
>>
>
>
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
