On Thu, 2008-10-23 at 11:39 -0700, Jack Lauman wrote: > I've got an ASUS M3N78-EMH HDMI motherboard with 2 Gb RAM & AMD 5600 X2 > proc. > > There are (2) Seagate ST350032NS (500 GB SATA drives) configure in the > BIOS for a RAID1. The OS is RedHat Fedora 9. > > Following successful installation, it fails to boot. The grub boot > loader displays correctly but immediately goes into POST and reboots as > soon as the OS begins to load. There are no errors displayed. > > If I use the recovery CD, I can mount the sysimage and run yum update > and install software successfully. I cannot get this machine to boot on > it's own without following this procedure. > > Any assistance in resolving this would be greatly appreciated. ---- BIOS Raid1 ? on ASUS motherboard? sounds like fake raid and wouldn't be supported...at least not without some tacky vendor supplied driver. Perhaps you need to give us info on this BIOS RAID (lspci -v) I suspect that you would find 'software' RAID much easier to install and get working and probably perform better too. Craig -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
