On Sat, 2008-10-11 at 13:55 -0400, Bill Davidsen wrote: > Wasn't used before, but the setup greyed out the channel setting in > "Managed" mode. That's to be expected, in managed mode you're connecting to an access point, and *it* manages that. It picks the channel (or is preset to use a particular one), and all the clients scan the channels to find the local access point, and use that one. > I do go to one site which has two AP with the same name, different > channels, and different keys. I didn't design their network, and while > I can see the need for two AP and keys, I see no benefit from using > the same name. That's probably poor configuration - many access points come with a predefined name (e.g. calling themselves "linksys") and their owners never bother to change them. There is a use for having access points with the same ID, so that users roaming through a large complex could just connect to "college" with the nearest access point answering to that name. Though you'd also have the same key on all the access points. That leaves users with just one thing to configure (what key goes with what name), the client will scan the channels to find an access point, you wouldn't try hard setting one. -- [tim@localhost ~]$ uname -r 2.6.26.5-45.fc9.i686 Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
