On Mon, 2008-10-06 at 00:09 +0800, edwardspl@xxxxxxxxxx wrote:
> Dear All,
>
> How can we enable the services of "syslog-ng" and "sysstat" in FC9
> Text mode ?
>
> Thanks,
>
> Edward.
Using the chkconfig command
>
> Olteanu Eugen wrote:
> > Ok you dont seem to have any problem with your modules..so you dont
> > need to modify anything in modprobe.conf. This means your network is
> > fine..
> >
> > The ntsysv tools shows a list of services that are off or on at a
> > normal reboot. Depending on what you use that computer for you might
> > have more servers "on".
> >
> > Here are the ones that I have "on":
> >
> > acpid
> > avahi-daemon
> > cpuspeed
> > crond
> > gpm
> > haldaemon
> > httpd
> > iptables
> > irqbalance
> > mdmonitor
> > messagebus
> > mysqld
> > network
> > sshd
> > syslog-ng
> > sysstat
> > xinetd
> >
> > Also you should know that if you have a graphical machine
> > (kde/gnome) then you are in lvl 5. If you boot in text mode you are
> > in lvl 3.
> > So I have all those services on in lvl 5. If you switch to lvl 3
> > there might be others on.
> >
> >
> >
> > On Wed, Oct 1, 2008 at 3:20 PM, <edwardspl@xxxxxxxxxx> wrote:
> > Hello,
> >
> > Sorry,
> > My means is "What service must be started-up by using ntsysv
> > command line ?"
> > Then the tool of "system-config-network" is good for work ?
> >
> > BTW:
> > [root@svr1 ~]# /etc/rc.d/init.d/network restart
> > Shutting down interface eth0: [
> > OK ]
> > Shutting down interface eth1: [
> > OK ]
> > Shutting down loopback interface: [
> > OK ]
> > Bringing up loopback interface: [
> > OK ]
> > Bringing up interface eth0: [
> > OK ]
> > Bringing up interface eth1: [
> > OK ]
> > [root@svr1 ~]#
> >
> >
> > Thanks.
> >
> > Edward.
> >
> > Olteanu Eugen wrote:
> > > You dont need to stop anything.. What
> > > does : /etc/init.d/network start say?
> > >
> > > On Wed, Oct 1, 2008 at 2:12 PM, <edwardspl@xxxxxxxxxx>
> > > wrote:
> > > Hello,
> > >
> > > Would you mind to tell me may be I have stop which
> > > startup services by ntsysv ?
> > > Then the system-config-network can't be good for
> > > work ?
> > >
> > >
> > > Thanks !
> > >
> > > Edward.
> > >
> > > Olteanu Eugen wrote:
> > > >
> > > > Probably you broke smth in there.. try to
> > > > remove those 2 packets and then install them
> > > > again via yum.
> > > >
> > > >
> > > >
> > > >
> > > > On Wed, Oct 1, 2008 at 2:03 PM,
> > > > <edwardspl@xxxxxxxxxx> wrote:
> > > > Hello,
> > > >
> > > > Just running the tools :
> > > >
> > > > Error in sys.excepthook:
> > > > Traceback (most
> > > > recent call last):
> > > >
> > > > File
> > > > "/usr/sbin/system-config-network-tui",
> > > > line 120, in <lambda>
> > > >
> > > > PRG_NAME, PRG_VERSION)
> > > >
> > > > File
> > > > "/usr/share/system-config-network/netconfpkg/exception.py", line 332, in handleException
> > > > import gtk
> > > > File
> > > > "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 79, in <module>
> > > > _init()
> > > >
> > > > File
> > > > "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 67, in _init
> > > >
> > > > _gtk.init_check()
> > > >
> > > > RuntimeError: could not open display
> > > >
> > > > Original exception
> > > > was:
> > > >
> > > > Traceback (most recent call last):
> > > >
> > > > File
> > > > "/usr/sbin/system-config-network-tui",
> > > > line 277, in <module>
> > > >
> > > > plist = getProfileList()
> > > > File
> > > > "/usr/share/system-config-network/netconfpkg/NCProfileList.py", line 651, in getProfileList
> > > >
> > > > __PFList.load()
> > > >
> > > > File
> > > > "/usr/share/system-config-network/netconfpkg/NCProfileList.py", line 88, in load
> > > >
> > > > self.loadprof(pr, profdir)
> > > > File
> > > > "/usr/share/system-config-network/netconfpkg/NCProfileList.py", line 101, in loadprof
> > > >
> > > > devicelist =
> > > > NCDeviceList.getDeviceList()
> > > >
> > > > File
> > > > "/usr/share/system-config-network/netconfpkg/NCDeviceList.py", line 318, in getDeviceList
> > > > __DVList.load()
> > > > File
> > > > "/usr/share/system-config-network/netconfpkg/NCDeviceList.py", line 78, in load
> > > >
> > > > hwlist =
> > > > NCHardwareList.getHardwareList()
> > > > File
> > > > "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 759, in getHardwareList
> > > >
> > > > __HWList.load()
> > > >
> > > > File
> > > > "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 603, in load
> > > >
> > > > self.updateFromSystem()
> > > >
> > > > File
> > > > "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 483, in updateFromSystem
> > > >
> > > > self.updateFromHal(hdellist)
> > > >
> > > > File
> > > > "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 447, in updateFromHal
> > > >
> > > > hal = NCBackendHal.NCBackendHal()
> > > > File
> > > > "/usr/share/system-config-network/netconfpkg/NCBackendHal.py", line 30, in __init__
> > > >
> > > > self._dbusBus = dbus.SystemBus()
> > > >
> > > > File
> > > > "/usr/lib/python2.5/site-packages/dbus/_dbus.py", line 200, in __new__
> > > >
> > > > private=private)
> > > > File
> > > > "/usr/lib/python2.5/site-packages/dbus/_dbus.py", line 106, in __new__
> > > > bus =
> > > > BusConnection.__new__(subclass,
> > > > bus_type, mainloop=mainloop)
> > > >
> > > > File
> > > > "/usr/lib/python2.5/site-packages/dbus/bus.py", line 125, in __new__
> > > >
> > > > bus = cls._new_for_bus(address_or_type,
> > > > mainloop=mainloop)
> > > >
> > > > dbus.exceptions.DBusException:
> > > > org.freedesktop.DBus.Error.FileNotFound:
> > > > Failed to connect to
> > > > socket /var/run/dbus/system_bus_socket:
> > > > No such file or directory
> > > >
> > > > [root@svr1 ~]#
> > > >
> > > > And the tools seem hang....
> > > >
> > > > Any solution for fixing this problems ?
> > > >
> > > >
> > > > Thanks !
> > > >
> > > > Edward.
> > > >
> > > > Olteanu Eugen wrote:
> > > > > Launch : system-config-network-tui
> > > > >
> > > > > On Wed, Oct 1, 2008 at 1:57 PM,
> > > > > <edwardspl@xxxxxxxxxx> wrote:
> > > > > Hello,
> > > > >
> > > > > Just checked the default
> > > > > system :
> > > > >
> > > > > [root@svr1 ~]# rpm -qa | grep
> > > > > "system-config-network"
> > > > > system-config-network-tui-1.5.7-1.fc9.noarch
> > > > > system-config-network-1.5.7-1.fc9.noarch
> > > > > [root@svr1 ~]#
> > > > >
> > > > > So, what else I can do it ?
> > > > >
> > > > > Thanks
> > > > >
> > > > > Edward
> > > > >
> > > > >
> > > > > Olteanu Eugen wrote:
> > > > > > yum install
> > > > > > system-config-network.noarch
> > > > > > system-config-network-tui.noarch
> > > > > >
> > > > > > Then launch
> > > > > > system-config-network-tui.
> > > > > >
> > > > > >
> > > > > > On Wed, Oct 1, 2008 at 1:46
> > > > > > PM, <edwardspl@xxxxxxxxxx>
> > > > > > wrote:
> > > > > > Timothy Murphy
> > > > > > wrote:
> > > > > > > edwardspl@xxxxxxxxxx wrote:
> > > > > > >
> > > > > > >
> > > > > > > > After the installation of FC9...
> > > > > > > > I can't running the tool of "system-config-network" for configuring the
> > > > > > > > network setting...
> > > > > > > >
> > > > > > > ...
> > > > > > >
> > > > > > > > For text mode....
> > > > > > > > How can we config the setting of Networking ?
> > > > > > > >
> > > > > > > > I can modify the ifcfg-ethxxx files, but can't ti find out the
> > > > > > > > modprobe.conf file...
> > > > > > > >
> > > > > > > > Any more help ?
> > > > > > > >
> > > > > > > I'm no expert, but I doubt if you are giving enough information
> > > > > > > for any expert to help.
> > > > > > > Eg are you running NetworkManager
> > > > > > > ("chkconfig --list | grep -i net")
> > > > > > > What do you mean by "I cannot run system-config-network"?
> > > > > > > What actually happens if you do try to run it?
> > > > > > > Etc
> > > > > > >
> > > > > > Hello,
> > > > > >
> > > > > > [root@svr1 ~]#
> > > > > > chkconfig --list |
> > > > > > grep -i net
> > > > > > NetworkManager
> > > > > > 0:off 1:off 2:on
> > > > > > 3:on 4:on 5:on
> > > > > > 6:on
> > > > > > netconsole
> > > > > > 0:off 1:off
> > > > > > 2:off 3:on
> > > > > > 4:off 5:off 6:on
> > > > > > netfs
> > > > > > 0:off 1:off
> > > > > > 2:off 3:off 4:on
> > > > > > 5:on 6:off
> > > > > > netplugd
> > > > > > 0:off 1:off
> > > > > > 2:off 3:off
> > > > > > 4:off 5:off
> > > > > > 6:off
> > > > > > network
> > > > > > 0:off 1:off
> > > > > > 2:off 3:on
> > > > > > 4:off 5:off 6:on
> > > > > > [root@svr1 ~]#
> > > > > >
> > > > > > So, which services
> > > > > > musted be started up
> > > > > > and which packages
> > > > > > must be installed,
> > > > > > then we can use
> > > > > > system-config-network ?
> > > > > >
> > > > > > Thanks !
> > > > > >
> > > > > > Edward.
> > > > > >
> > > > > >
> > > > > > --
> > > > > > fedora-list mailing
> > > > > > list
> > > > > > fedora-list@xxxxxxxxxx
> > > > > > To unsubscribe:
> > > > > > https://www.redhat.com/mailman/listinfo/fedora-list
> > > > > > Guidelines:
> > > > > > http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
> --
> fedora-list mailing list
> fedora-list@xxxxxxxxxx
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
> Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
--
=======================================================================
If you don't do the things that are not worth doing, who will?
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@xxxxxxxxxxxxx
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
