Les Mikesell wrote:
jeff@xxxxxxxxxx wrote:
I've again run into a problem with RAID-1 on my system. I can mount
all
the raid volumes using the linux rescue boot option from the install
CD.
[...]
it appears as the mdadm is not starting properly or assembling the array
properly. Can anybody confirm if the init file appears correct? I
tried modifying the mdadm line to remove the /dev/md3 (and 6) and it
tried to assemble all the volumes but said that /dev/mdX (listed all
my array volums) didn't exist with "mdadm: no devices found for
/dev/md..."
This is probably too obvious to mention, but are the underlying
partition types set to FD (raid autodetect). I don't see why they'd
work from the rescue boot if they aren't though unless you are
assembling them by hand.
I wish that was the problem but alas, I checked, all the partitions are
set to 0xfd, and the rescue disk is automatically assembling them.
Jeff
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
