>How do I find out what host a device is running on ? > >Thanks Well, using the 2.4 kernel method of /proc, on a small server exporting some iSCSI targets here, I get this: [root@host ~]# #cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: ST3160812AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: ST3160812AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Host: scsi2 Channel: 02 Id: 00 Lun: 00 Vendor: LSI Model: MegaRAID 8888ELP Rev: 1.12 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi2 Channel: 02 Id: 01 Lun: 00 Vendor: LSI Model: MegaRAID 8888ELP Rev: 1.12 Type: Direct-Access ANSI SCSI revision: 05 But that's being deprecated by the /sys in the 2.6 kernels, and aside from looking manually which can be tedious, I just install lsscsi, [root@host ~]# lsscsi [0:0:0:0] disk ATA ST3160812AS 3.AA /dev/sda [1:0:0:0] disk ATA ST3160812AS 3.AA /dev/sdb [2:2:0:0] disk LSI MegaRAID 8888ELP 1.12 /dev/sdc [2:2:1:0] disk LSI MegaRAID 8888ELP 1.12 /dev/sdd If your distro doesn't have lsscsi or you don't want to install it just use the /proc method... So to rescan everything on the 8888ELP, I would issue: [root@host ~]# echo "- - -" > /sys/class/scsi_host/host2/scan Which is exactly what I use to enumerate any new arrays I configure via the MegaRAID cli when I can't reboot if for example I can not unmount a target. HTH, jlc -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
