Craig White wrote:
On Sun, 2008-09-28 at 22:53 +0800, edwardspl@xxxxxxxxxx wrote:
Dear All,
I just have the problem of "Destination Host Unreachable" from eth1
( ping to other same network segment internal machine ) as the
following setting :
[root@svr1 network-scripts]# cat ifcfg-eth0
DEVICE=eth0
BOOTPROTO=dhcp
[root@svr1 network-scripts]#
[root@svr1 network-scripts]# cat ifcfg-eth1
DEVICE=eth1
BOOTPROTO=static
BROADCAST=192.168.0.255
IPADDR=192.168.0.254
NETMASK=255.255.255.0
NETWORK=192.168.0.0
[root@svr1 network-scripts]#
[root@svr1 network-scripts]# cat ../network
NETWORKING=yes
HOSTNAME=svr1
[root@svr1 network-scripts]#
So, what is the problem of the current setting ?
----
looks OK except that I would recommend that you use a FQDN
in /etc/sysconfig/network and not just a name... i.e. srv1.mynetwork.com
obviously /dev/eth0 is not going to be loaded at boot time - but that
may be your intentions.
----
BTW, what different between modify ifcfg-eth? and running the tools of
"system-config-network" ?
----
shouldn't be any difference as either should modify the
same /etc/sysconfig/network-scripts/ifcfg-ethX file
system-config-network does have the ability to also edit your 'hosts'
file (/etc/hosts), you dns resolution configuration (/etc/resolv.conf)
at one session.
Craig
Hello,
How can we enable and verify the Network Interface working with full
duplex mode ?
Thanks
Edward.
|
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
