Hi Mike, thanks for the reply unfortunately this does not help :( my routing table already has these routes :( and while trying to run the ip route it return Rtnetlink answers: File exists I have tried to eliminate routes with the route del -net 192.168.10.0 netmask 255.255.255.0 and then add the path using ip route add dev 192.168.10.0/24 eth ... Unfortunately, although this adds routes, it's not work inside / etc/sysconfig/network-script/ifcfg-eth4 options are: DEVICE = eth4 HWADDR = 00:19: D1: 8C: 02:5 e ONBOOT = yes NM_CONTROLLED = no TYPE = Ethernet USERCTL = no PEERDNS = yes IPV6INIT = no BOOTPROTO = none NETMASK = 255.255.255.0 IPADDR = 192.168.5.254 In a similar way for other interfaces. Like this content in / etc/sysconfig/networking/devices/ifcfg-eth4 : ( it is curious to me that this step also with the same configuration but in opensuse 11 In my fedora the kernel is 2.6.25-14. I think that might be missing activate an option in the kernel or sysctl Best regards -- This is an email sent via the webforum on http://fcp.surfsite.org http://fcp.surfsite.org/modules/newbb/viewtopic.php?post_id=291586&topic_id=61844&forum=10#forumpost291586 If you think, this is spam, please report this to webmaster@xxxxxxxxxxxxxxxxx -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
