On Sun, Aug 31, 2008 at 11:35 PM, Nataraj <incoming-fedora-list@xxxxxxx> wrote: >> >> >> When I try to open the DVD burner tray with the command eject, I get >> >> >> the following problem: >> >> >> >> >> >> $ eject >> >> >> eject: unable to find or open device for: `cdrom' >> >> >> $ >> >> >> >> >> >> Any ideas? >> >> > >> >> > Use "eject /dev/name-of-dvd-device". If you're not sure what the device >> >> > name is, an easy way to find out is by firing up k3b, which will look >> >> > for it (there are probably quicker ways but this works). >> >> >> >> Thanks, Patrick. K3b does not see the inserted CD. >> >> >> >> The problem that I am reporting did not occur before. I suspect that >> >> some updates may have destroyed what was correctly working. >> >> >> >> Any further ideas? >> > >> > /dev/sr0 >> > /dev/sr1 >> >> No progress: >> >> $ eject /dev/sr0 >> eject: unable to find or open device for: `/dev/sr0' >> $ eject /dev/sr1 >> eject: unable to find or open device for: `/dev/sr1' >> $ >> >> Paul > > Check /var/log/messages or run /bin/dmesg right after booting. If you > have a recent standard kernel, it should detect the cdrom drive and load > a driver for it. > > Mine looks like this: > Aug 31 11:03:16 whitewave kernel: scsi 5:0:0:0: CD-ROM PLEXTOR DVDR PX-712A 1.03 PQ: 0 ANSI: 5 > Aug 31 11:03:17 whitewave kernel: sr0: scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray > Aug 31 11:03:17 whitewave kernel: Uniform CD-ROM driver Revision: 3.20 > > There may be other unrelated lines between these lines in the messages > file. Once you've verified that the kernel sees your drive and is > loading a driver, you can create inode entry in /dev with something like > this: > > cd /dev > ./MAKEDEV sr > > Then you can create a symlink to /dev/cdrom > ln -s ./sr0 cdrom > > Unless your system is screwed up in some other way, my sense is that > this should work. Otherwise you can use mknod to create the device. Thanks, Nataraj and Mikkel. I think the problem is not Linux specific. My machine has also got MS Windows, and MS Windows cannot also detect my burner. I suspect that the problem is caused by the fact that I did recently a BIOS update. My motherboard is a Gigabyte GA-8I945PL-G and my burner is an IDE one. Any ideas? Paul -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
