I recently installed F-9 using the Gnome LiveCD on a new hard drive. When I opened the computer case there were only two SATA connectors on the motherboard so I removed dev/sda and put the new drive in it's place. The drive removed contained only the original XP which I don't use and the /boot file. I chose the live cd to save bandwidth since I am limited as to how much I can use via my satellite connection. I then obtained what I want via yum.
After the installation finished I found that grub did not offer the F-8 Linux on the dev/sdb as an option. It just wasn't there. I had assumed the installation would pick it up but didn't. Now a new /boot is on the new drive.
I the bought an SATA card and installed it with the original drive [/dev/sdc Windows XP and /boot] to it. I thought I might be able to maniputlate the bios settings to control the boot situation at least experimentally as a first step but no, when I go to bios-setup it only shows two SATA drives with the third drive, the one on the added card, as just being there with some identifying information but there's no way I have found to boot from it short of swapping cables between the drives.
I can manipulate things from the command line well enough to copy files. [mount /dev/mapper/VolGroup00-LogVol00 /mnt] makes the files available under /mnt but ideally I would like to be able to boot from one or the other, /dev/sda or /dev/sdc as it stands now. I've looked for information on grub configuration but none of it is very clear to me. What would help would be a how to with a few examples of typical grub configuration files for a multi-boot system.
I guess I'm in over my head. Any suggestions pointing me in the right direction will be appreciated.
Bob -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
