not sure, but.... if you set the reset btn, and then hook the device up to a system, you can set it via it's base ip address. make sure you have no other hardware hooked to the box, in order to prevent conflicts. i think the ip is 192.168.1.1, or 192.168.0.1, or something to that effect. you could also try to check the linksys site to see what the base ip is.. -----Original Message----- From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx]On Behalf Of Tim Fenn Sent: Thursday, August 28, 2008 5:24 PM To: For users of Fedora Subject: Re: Linksys WRT54G2 On Thu, 28 Aug 2008 15:27:47 -0700 "Rich Emberson" <emberson.rich@xxxxxxxxx> wrote: > I run Fedora 9 (only, no windows or macs). I recently was given a > Linksys WRT54G2 > Wireless-G broadband router with its installation CD (which according > to the terse instructions has a windows and mac modes - of course no > Linux). > > I want to use this as simply a wireless access point to my existing > LAN. I already have a router and DSL internet connection. > > Anyone have any experience or links which can help me figure out how > to use this puppy? > This is what I followed on my WRT54GL: http://www.dd-wrt.com/wiki/index.php/Wireless_Access_Point HTH, Tim -- CAPS LOCK IS THE CRUISE CONTROL OF AWESOMNESS -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
