On Sun, 2008-08-17 at 17:53 +0000, Peter Boy wrote: > Am Samstag, den 16.08.2008, 10:12 -0700 schrieb Sean Bruno: > > The desktop area for each monitor, is somehow exceeding the displayable > > area(I have to move the mouse to the edge of the monitor to make the > > desktop scroll over to the rest of the desktop). This only shows up in > > a dual head configuration. If I simply comment out the second display, > > my primary display is sized correctly and all is well. > > .... > > Help? > > > When I updated to F9 I had some probs with my ati dual head card. My > conf file is: > > Section "ServerLayout" > Identifier "ATI dual head configuration" > Screen 0 "Default Screen" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > ... (modules, keyboard, etc) > > Section "Device" > > Identifier "ATI Radeon" > Driver "radeon" > VendorName "ATI corp." > BoardName "ATI Technologies Inc RV350 AP [Radeon 9600]" > BusID "PCI:1:0:0" > # Option "AGPFastWrite" "on" > # Option "AccelMethod" "EXA" > Option "Monitor-DVI-0" "Panel-0" > Option "Monitor-DVI-1" "Panel-1" > EndSection > > Section "Monitor" > > Identifier "Panel-1" > VendorName "Monitor Vendor" > ModelName "NEC MultiSync LCD1700NX (Digital)" > # Comment all HorizSync and VertSync values to use DDC: > # HorizSync 31.0 - 68.0 > # VertRefresh 56.0 - 75.0 > # DisplaySize 340 270 > Option "dpms" > # Option "LeftOf" "Panel-0" > # Option "Ignore" "true" > > EndSection > > Section "Monitor" > > Identifier "Panel-0" > VendorName "Monitor Vendor" > ModelName "NEC MultiSync LCD1700NX (Digital)" > # Comment all HorizSync and VertSync values to use DDC: > # HorizSync 31.0 - 68.0 > # VertRefresh 56.0 - 75.0 > Option "dpms" > Option "RightOf" "Panel-1" > > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "ATI Radeon" > Monitor "Panel-1" > DefaultDepth 24 > > SubSection "Display" > Viewport 0 0 > Depth 24 > # big virtual screen to place the monitors > Virtual 2560 1024 > # Modes "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > > EndSection > > > Especially important is the "Virtual" option in section "Screen". > > You may check for a ~/.gnome2/monitors.xml file and remove / rename it > and check. See https://bugzilla.redhat.com/show_bug.cgi?id=457673 > > > Peter > > > Thanks for the insight. I came up with the following xorg.conf that allows me to run dual screens again! Sean
# Xorg configuration created by pyxf86config Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" # keyboard added by rhpxl Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Device" Identifier "Videocard0" Driver "radeon" Screen 0 Option "Monitor-DVI-0" "Monitor0" Option "Monitor-VGA-0" "Monitor1" EndSection Section "Monitor" Identifier "Monitor0" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 74.7 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Monitor" Identifier "Monitor1" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 74.7 VertRefresh 56.0 - 65.0 Option "dpms" Option "RightOf" "Monitor0" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor 0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 #Virtual "2560x1024" Modes "1280x1024" EndSubSection EndSection
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
