Re: OT: Cleaning video head on my Betamax VCR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Gene Heskett wrote:
On Sunday 10 August 2008, Mogens Kjaer wrote:
Thompson Freeman wrote:
...

As solvents, it is my impression that isopropyl alcohol and ethanol are
very similar. As such, I'm curious if the video engineers have tried
it.
In my spare time (!) I'm involved in a society for restoration
of old, Danish computers.

We have a ½" 9-track tape drive (with SCSI interface, connected to
a Fedora box, bringing it a bit on-topic again).

Some times when reading old magtapes, the heads become very dirty.

Where are the tape being stored? Tape, in higher humidities and temps, becomes very abrasive, recommended storage is for relative humidity to be under 25% and temps below 50F. I once was the ACE at a tv station where the tapes were all stored in between uses in a walkin cooler held at about 45F. The air conditioner was set for coils at about 34F so they would wring as much moisture out of the air as possible without freezing up the evaporator coils. We were getting 5000 hours out of a 1000 hour rated u-matic heads way back then.
There is a myth that tape suppliers actually have the slightest clue how there products will behave over time. In the 1980s we stored a room full of 1" wide Ampex tapes for about 3 years, until we were ready to do some further analysis of the flight data they contained. The room was run at the temperature and humidity recommended by Ampex, and the logs showed this was correctly maintained throughout the 3 years. When we tried using the tapes, the binding agent for the magnetic material had degraded and stuck the layers of tape very solidly together. We could unscrew the side plates of the reels, and cut through the cake of tape with a hacksaw. The layers were so solidly bonded that the tape remained a solid lump after this treatment, and could be beaten with a hammer for a while before starting to break up. If we simply tried unrolling the tape from a spool, we ended up with a translucent plastic film, and a lot of flaky brown stuff.

Recommended storage conditions are only quoted to create the illusion that the tape maker has a clue what they are doing. :-)

Regards,
Steve

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux