Re: Hardware trouble? Me? Or ...??

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 09 Aug 2008 17:12:25 +0000, g wrote:

> Beartooth wrote:
> <snip>
>> I thought I had implied that it was indeed the only way, or the
> 
> you did, but you failed to mention 2 computers on same ups. [see below]

	That was probably a red herring and a brain fart, actually; the 
second is a laptop -- there at the moment, because I'm finishing up an 
install. It doesn't live there.

>> No power cord I've ever seen could be pulled fast from anything I
> 
> not a matter of strength. 'fast' instead of 'slow'. also, there you go
> using 'power cord'. 'power cord plug', never by 'power cord'. [i know, i
> am just trying to maintain a way thinking to doing]

	I don't understand the terminological quibble. (I do pull by the 
plug, not the cord.) What I'm trying to say is that the power cords I 
have plug so deep and so tightly into both ends that the only way to 
remove one is to wiggle it, gaining perhaps 1/5 mm per wiggle. That 
consumes several seconds.

>> Would it be better to turn the UPS off?? The monitor, and another
>> computer, are plugged into that same UPS.
> 
> i guess i am just 'old school' on that one. i use 1 ups for 'playstation
> computer', 1 ups for 'file server' computer. 'external server',
> 'firewall server' and 'router server' are on single ups until i can
> afford 2 more ups. [see below]

	My wife's computer, downstairs, has its own UPS. The three PCs 
that live at my desk have one each; an extra, like the laptop, gets added 
into the biggest. The monitor is also connected to the biggest.

>> The young friend was here yesterday evening, and concluded immediately
>> that the power supply was dead. Maybe it did arc somewhere;
> 
> did you try known good power cord? even with pulling 'power cord plug',
> wiring connections to plug can go bad just from handling.

	I had gotten one out, but he arrived early. I have now; no joy. 

	Also, plugging or unplugging (not both, I just disremember which) 
made a faint sound, which he called typical of bad power supply even 
before he took the lid off.

> maybe law of averages caught up to you. maybe it was just it's time.
> 
>> odd that that hasn't happened before. I've been pulling power cords, in
> 
> {below}
> give thought to 1 power strip with a switch per computer when running
> more than one computer on a single ups. then you will not have to pull
> 'power cord plug'. unless switch on strip goes bad.

	Good idea. I wondered why they put those switches there ... And I 
do have spares.
 
> also, i do hope you are running 'apcups' or 'nut' on both computers.

	I install nut on each machine, but haven't gotten around to 
learning yet how to connect it up and use it. When we get power failures, 
I just go around and shut down each machine, then its UPS.

>> The dead power supply is a type we can't get around here.
> 
> open cover to see if fuse is blown. hopefully it would blow if problem
> was a current surge. if fuse is blown, ask young friend to check diodes
> to see if one or more of them shorted. also note if any resistors are
> discoloured.

	I'll forward this post to him shortly; thanks!

> if your friend lucks out and finds such is case and able to repair, ask
> him to add a switch. lacking of a switch is one more 'screw thee'
> attitudes of oem.

	Hmmm ... I have had machines -- eom machines, actually, with a 
second power switch on the back. The friend who assembles ones for me 
hasn't been doing that ...
 
> <snip>
>> of trifocal fingers and arthritic eyeballs, what I know of computer
>> hardware would go in a gnat's eye, and never discommode the gnat.
> 
> lol. not your disabilities, but you phrasing.

	I work on it; incidentally, the original Reverend Spooner enjoyed 
spoonerisms, and collected them. His favorite, uttered in disapprobation 
to a pupil, went "Mr. X, you have hissed all my mystery lectures, and 
tasted two whole worms."
 
> good luck to your recovering system.

	Thanks again!

-- 
Beartooth Staffwright, PhD, Neo-Redneck Linux Convert
Fedora 8 & 9; Alpine 1.10, Pan 0.132; Privoxy 3.0.6;
Dillo 0.8.6, Galeon 2.0.3, Epiphany 2.20, Opera 9.27, Firefox 2.0
Remember I know precious little of what I am talking about.

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux