Re: Fedora 9 and VMWare Server

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 2008-07-19 at 23:49 -0700, Michael Eager wrote:
> Christopher A. Williams wrote:
> > On Sat, 2008-07-19 at 22:39 -0400, Kevin J. Cummings wrote:
> >> Michael Eager wrote:
> >>> Kevin J. Cummings wrote:
> >>>> Mike Burger wrote:
> >>>>>> Has anyone been able to get VMWare Server running on F9?
> >>>>>>
> >>>>>> I've installed VMWare Server from the rpm, run the config
> >>>>>> script and everything seems to be installed correctly.
> >>>>>> When I try to connect to the web management server, it
> >>>>>> tells me that the server is not responding.
> > 
> > <snip...>
> > 
> >>> I had run the vmware-config program and started the server, but
> >>> I decided to try restarting the server.  It complained that I needed
> >>> to run vmware-config again, so I did.  It built all modules without
> >>> error and started all of the VMware services.
> >>>
> >>> One thing which looks odd is that when the vmware-config script
> >>> starts VMware Services, that the line "VMware Virtual Infrastructure
> >>> Web Access" doesn't have either [OK] or [FAILED] after it.
> >>>
> >>>> After that (if it was successful), you should be able to connect to 
> >>>> the server.
> >>> No such luck.  Starting the browser and pointing to localhost:
> >>> gives me a VI Web Access dialog (as before), but entering in
> >>> the admin user/password results in a complaint that the server
> >>> is not responding, and suggests that I check that the server is
> >>> running and accepting connections.
> >>>
> >>> The following processes are running:
> >>>   vmnet-bridge
> >>>   vmware-authdlau
> >>>   vmware-watchdog
> >>>   vmware-hostd
> > 
> > Aha! There's a hint here (see below).
> > 
> >> I don't see vmware-server in the above list.
> >> This is what got built and started on my machine:
> >>
> >>> Starting VMware services:
> >>>    Virtual machine monitor                                 [  OK  ]
> >>>    Virtual ethernet                                        [  OK  ]
> >>>    Bridged networking on /dev/vmnet0                       [  OK  ]
> >>>    Host-only networking on /dev/vmnet1 (background)        [  OK  ]
> >>>    Bridged networking on /dev/vmnet2                       [  OK  ]
> >>>    Host-only networking on /dev/vmnet8 (background)        [  OK  ]
> >>>    NAT service on /dev/vmnet8                              [  OK  ]
> >>>    Starting VMware virtual machines...                     [  OK  ]
> >> How does this compare with your build?
> > 
> > ...And here's the other shoe dropping. You are each running different
> > builds of VMware Server!
> > 
> >>> If I go to https://localhost:902, I get the following line:
> >>>   220 Vmware Authentication Daemon Version 1.10; SSL Required,
> >>>   ServerDaemonProtocol:SOAP, MKSDisplayProtocol:VNC , VMXARGS supported
> >> Same as me, but it runs on a different port number on my machine.   YMMV
> > 
> > The difference you are seeing between the two is that one of you is
> > running VMware Server version 1.0.6 while the other one is running the
> > pre-release version of VMware Server 2.0 (currently at RC1 stage).
> > 
> > VMware Server 1.0.6 works quite well under F9, but VMware Server 2.0 RC1
> > has many issues, including the ones the OP has noted. I'm not certain
> > how to overcome these yet, but I know that there are several things that
> > seem to conflict with regular F9 components. Apache is just for openers.
> > Other things just plain don't work at all.
> > 
> > I have yet to find a solution for getting 2.0RC1 going. Anyone given it
> > a try and had success getting it to work yet?
> 
> Yes, I'm running 2.0.   It seems I'm not alone.
> Jeez, I hate the bleeding edge.  :-)
> 
> I'll look into what happens when the startup script
> tries to run Web Access, and why it doesn't say [OK]
> or [FAILED].  Maybe there is a clue.
> 
> 
> -- 
> Michael Eager	 eager@xxxxxxxxxxxx
> 1960 Park Blvd., Palo Alto, CA 94306  650-325-8077
> 

I would check for a selinux violation in /var/log/audit/audit.log
and/or /var/log/messages.  You can temporarily try
"setenforce 0" to test and then update the selinux policy afterwards.
I've seen this problem under CentOS 5.2 with Vmware server 2.  I've also
seen other problems where the hostd and/or the webaccess process would
not run for other reasons.

Nataraj

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux