Todd Denniston wrote:
lsi does not show up on http://linux-ata.org/driver-status.html so you
have to figure out what driver supports the card and ask about that driver.
It's the megaraid_sas driver but it's not shown on the linux-ata.org
site, so that doesn't bode too well!
3Ware 9550SX,
http://linux-ata.org/driver-status.html#tware
apparently you need to ask at the driver maker's site if they support it.
Aha, I shall do so.
according to the 'Driver / feature matrix'
http://linux-ata.org/driver-status.html#matrix
driver=sata_mv
feature=Device Hotplug
feature state=no
Well spotted, I saw this bit of the same page...
http://linux-ata.org/driver-status.html#marvell
... and it says:
Driver name: sata_mv
Summary: Similar to ServerWorks "frodo": per-device queues, full SATA
control including hotplug.
So I'm a little bit puzzled. Unless it means hotplugging the card itself?!?
Anyway, thanks for the pointers.
--
Chris Mocock
chris@xxxxxxxxxxxxx
www.wavestore.com
Office: +44 (0) 208 756 5456
Mobile: +44 (0) 7967 321 628
Wavelet Technology Ltd., Unit 1 Hayes Metro Centre, Springfield Road,
Hayes, Middlesex UB4 0LE
The contents of the e-mail and any attached files are confidential and
intended solely for the use of the individual to whom they are addressed.
If you are not the intended recipient and have received this email in
error, you are advised that the subsequent use, dissemination,
forwarding, printing or copying of any part of the e-mail is strictly
prohibited.
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
