Re: F9: Installing Ndiswrapper for AWLL6070 (rt2870)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Daniel B. Thurman wrote:

I have tried the Ralink way to try and get the Airlink-101 (rt2870)
built from sources, to setup ra0, configuration and all that and got
as far as getting the client to see the Access-points from the neighborhood
which was awesome, but failed to set the ESSID in order to connect
to my Access point.  Giving up at this point, I thought I'd try out the
Ndiswrapper method.

I was able to follow the instructions from this link:
http://forums.fedoraforum.org/showthread.php?t=29659

and from this link:
http://ndiswrapper.sourceforge.net/joomla/index.php?/component/option,com_openwiki/Itemid,33/id,installation/#install_windows_driver

and so far it *appears* that the drivers were installed and the wlan0 alias
was set up:

# ndiswrapper -l
rt2870 : driver installed
    device (14B2:3C27) present

# dmesg
ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
usb 1-1: reset high speed USB device using ehci_hcd and address 2
ndiswrapper: driver rt2870 (Ralink Technology, Corp.,11/16/2007,
1.00.05.0000) loaded
wlan0: ethernet device 00:1d:6a:33:fd:42 using NDIS driver: rt2870,
version: 0x0, NDIS version: 0x500, vendor: 'IEEE 802.11n Wireless
Card.', 14B2:3C27.F.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK;
AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new interface driver ndiswrapper

# /var/log/messages:
================
Jul 16 08:23:15 bronze kernel: ndiswrapper version 1.52 loaded (smp=yes,
preempt=no)
Jul 16 08:23:16 bronze kernel: usb 1-1: reset high speed USB device
using ehci_hcd and address 2
Jul 16 08:23:16 bronze kernel: ndiswrapper: driver rt2870 (Ralink
Technology, Corp.,11/16/2007, 1.00.05.0000) loaded
Jul 16 08:23:16 bronze kernel: wlan0: ethernet device 00:1d:6a:33:fd:42
using NDIS driver: rt2870, version: 0x0, NDIS version: 0x500, vendor:
'IEEE 802.11n Wireless Card.', 14B2:3C27.F.conf
Jul 16 08:23:16 bronze netplugd[7927]: wlan0: ignoring event
Jul 16 08:23:16 bronze kernel: wlan0: encryption modes supported: WEP;
TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
Jul 16 08:23:16 bronze kernel: usbcore: registered new interface driver
ndiswrapper
Jul 16 08:23:21 bronze netplugd[7927]: No interface name
Jul 16 08:23:21 bronze netplugd[7927]: Callback failed
<last two lines keep repeating, over and over...>

What I do not understand is why is netplugd reporting this?


So, I added:

# vi /etc/netplugd.d/netplug:
eth*
wlan*
<saved changes & quit>

then:
# service netplugd restart
# vi /var/log/messages:
===================
Jul 16 09:09:52 bronze netplugd[7927]: caught signal 15 - exiting
Jul 16 09:09:53 bronze netplugd[18477]: /etc/netplug.d/netplug eth0 in
-> pid 18477
Jul 16 09:09:53 bronze netplugd[18478]: /etc/netplug.d/netplug wlan0 in
-> pid 18478
Jul 16 09:09:53 bronze netplugd[18476]: wlan0: state INNING pid 18478
exited status 256
Jul 16 09:09:53 bronze netplugd[18476]: eth0: state INNING pid 18477
exited status 0
Jul 16 09:09:54 bronze avahi-daemon[9132]: Registering new address
record for fe80::21d:6aff:fe33:fd42 on wlan0.*.

waited.... and then saw:
Jul 16 09:11:04 bronze netplugd[18476]: No interface name
Jul 16 09:11:04 bronze netplugd[18476]: Callback failed
Jul 16 09:11:06 bronze ntpd[8519]: Listening on interface #6 wlan0,
fe80::21d:6aff:fe33:fd42#123 Enabled
Jul 16 09:11:22 bronze netplugd[18476]: No interface name
Jul 16 09:11:22 bronze netplugd[18476]: Callback failed

So, nothing changed.

Continuing, I tried to test the wlan0 connection with:
# iwconfig wlan0
<computer completely froze up - hard to hard-reboot the computer>

Any advice or suggestions?

I also wanted to add, that leaving the AWLL6070 (rt2870) driver as obtained
from either the Airlink-101 CD or from the Airlink-101 website downloaded
causes system instability. In some cases, the system will freeze up completely
and on other causes, rebooting fails to allow Gnome to come up, GDM restarts
over and over with the gdm display flashing with a black/blue background,
failing to start up.

Dan

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux