Re: nvidiafb problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



My code did not segfault on the previous GPU, and the segfaults appear to be occurring in the directfb libraries themselves, not in the code.  It seems as if the compiler might be optimizing out things that should not be optimized out, but I'm not entirely sure how to read that.  They also seem to be occuring randomly.  I can run it four times, and three of the times it'll segfault, the fourth it'll work fine.

I did a little reasearch last night...  I'm wondering if directfb doesn't support my GPU. It appears to only do NV_ARCH_30 and lower.

--Russell

On Sun, Jun 29, 2008 at 9:22 AM, Les <hlhowell@xxxxxxxxxxx> wrote:
Hi, Russel,
       Segfaults are probably your best indication of the problem.
Generically a segmentation fault occurs when you access memory allocated
to another process.  You can tramp all over your own processes memory
and not necessarily generate a segfault.  Since you are seeing the
problem when the size of the field changes, probably there is a fixed
array somewhere in your code that is inappropriately sized for the
larger screen sizes.  Also, if the Video processor is only sensing 64M,
it may be doing something weird as well.

       To trouble shoot this problem I would probably first check the video
processor to make sure it is properly seated in its socket.  Next I
would go carefully through the code looking for hard sized arrays or
fixed malloc sizes.  Check the #defines carefully to see what they have
and what comments you may have added about display sizes.  Then look at
any pointer use to make sure that it is cordoned off from exceeding the
array sizes in use.

After that you will need some software to monitor memory.  Several forms
exist, and I haven't used any in years, so I cannot recommend one for
you.  But if you check the archives, you will find some references last
year if I remember correctly.

       Also because Nvidia is proprietary, the group here has no vision into
their code or processes.  And if your code is producing segfaults, that
needs to be cleaned up before submitting bug reports anyway.

REgards,
Les H
On Sat, 2008-06-28 at 17:48 -0700, Russell Miller wrote:
> I have been having this problem for a while.  I was told on the fedora
> IRC channel that "this has nothing to do with fedora" and to stop my
> blathering, but I think that it is something that perhaps the
> community should at least be aware of and perhaps even hopefully can
> help me to solve.
>
> I am having an odd problem with nvidiafb.  I have written a program to
> do a mandelbrot set over framebuffer, just to learn how to make
> mandelbrot sets and how to use the framebuffer.  The program worked
> fine on some old hardware I had - an older nvidia AGP card.  But after
> I upgraded to a 6200, along with a Dual-core X2-based motherboard,
> suddenly it stops working.  More accurately, the framebuffer works
> fine at 1280x1024 until I start the program, at which time the image
> moves rapidly across the screen, reminiscent of an old TV that has
> lost its horizontal sync.  This does not happen at 640x480, and going
> up in resolution the side-to-side motion gets progressively faster.
>
> Obviously, this is useless for my purposes.
>
> I worked with the directfb people to try to rule out directfb being
> the culprit.  After I managed to get this working under VESA (with no
> acceleration, obviously, so it's almost useless), that pretty much
> ruled out directfb being the problem.  So I'm having to think that for
> some reason the nvidiafb driver is just not playing nice with my card.
>
> I should also note that it seems to detect an "NV22" card, with 64M of
> memory.  I have an NV44 card with 256M of memory.  Oddly enough, it
> seems to get that number from the PCI device ID, and really doesn't
> seem to care what it actually *is*.
>
> I'll paste some lspci output, etc., in hopes that it is useful.
>
> lspci for this card:
> 03:00.0 VGA compatible controller: nVidia Corporation NV44A [GeForce
> 6200] (rev a1)
>
> dmesg output on module being loaded:
> nvidiafb: Device ID: 10de0221
> nvidiafb: CRTC0 analog not found
> nvidiafb: CRTC1 analog found
> nvidiafb: EDID found from BUS1
> i2c-adapter i2c-2: unable to read EDID block.
> i2c-adapter i2c-2: unable to read EDID block.
> i2c-adapter i2c-2: unable to read EDID block.
> nvidiafb: CRTC 0appears to have a CRT attached
> nvidiafb: Using CRT on CRTC 0
> nvidiafb: MTRR set to ON
> Console: switching to colour frame buffer device 160x64
> nvidiafb: PCI nVidia NV22 framebuffer (64MB @ 0xC0000000)
>
> I should also note that a program that worked JUST FINE on the old
> hardware using the directfb libraries now randomly segfaults.
>
> --Russell
> --
> fedora-list mailing list
> fedora-list@xxxxxxxxxx
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux