Mark Haney wrote:
Jim wrote:
Mark Haney wrote:
I've had this F8 box working perfectly for the last 4 months or so
and for some reason now (and I assume this is due to the last round
of updates, but I don't know for certain, my wireless link (linksys
54g card) refuses to come up and connect. In dmesg I get lots of
'link not ready' messages. And even though the card was set to
startup on boot, I had to unset and reset that option to make that
work.
Even when I manually set I set it up, it doesn't want to come up.
The module is loaded, it just isn't behaving. Could it be kernel
related perhaps? I don't know where to start debugging this, since
it all LOOKS right.
First , what version of Fedora you using
Second , give the output of /sbin/lspci -v on your wireless card
Fedora 8. (that's in the OP, but not real noticeable)
lspci -v
02:09.0 Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: Linksys WMP54G ver 4.1
Flags: bus master, slow devsel, latency 64, IRQ 21
Memory at e8100000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [40] Power Management version 2
Kernel driver in use: rt61pci
Kernel modules: rt61pci
The only thing I've changed on this box recently has been the kernel
and associated updates.
It's not changed position, or anything like that. The AP moved about
10 feet, but until the beginning of this week this box worked great
with the AP in the new spot.
Restart your computer and see if the wireless card still works in the
older Kernel.
Did you compile this driver to work on Fedora ?
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
