|
Dear List I am trying to install my Intel(R)
PRO/Wireless on my fedora core system. I have installed the drivers dmesg | grep ipw2200
ipw2200: Intel(R)
PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq ipw2200: Copyright(c)
2003-2006 Intel Corporation ipw2200: Detected Intel
PRO/Wireless 2200BG Network Connection ipw2200: Detected geography ZZM (11 802.11bg
channels, 0 802.11a channels) I have also configured the device with the correct keys and
ESSID # Intel Corporation
PRO/Wireless 2200BG Network Connection DEVICE=eth1 > BOOTPROTO=dhcp HWADDR=00:0e:35:c2:93:ee NETMASK= DHCP_HOSTNAME= IPADDR= DOMAIN= TYPE=Wireless USERCTL=yes IPV6INIT=no PEERDNS=yes ESSID=BTVOYAGER2110-6F CHANNEL=1 MODE=Auto RATE=Auto KEY=s:xxxxxxxxxxxxxxxxxxxx When I reset the network I get Determining IP information
for eth1... failed; no link present. Check cable? and I my error log I get May 26 14:54:43 bilbo
avahi-daemon[3231]: New relevant interface eth1.IPv6 for mDNS. May 26 14:54:43 bilbo
avahi-daemon[3231]: Joining mDNS multicast group on interface eth1.IPv6 with
address fe80::20e:35ff:fec2:93ee. May 26 14:54:43 bilbo
avahi-daemon[3231]: Registering new address record for fe80::20e:35ff:fec2:93ee
on eth1. May 26 14:54:47 bilbo
avahi-daemon[3231]: Interface eth1.IPv6 no longer relevant for mDNS. May 26 14:54:47 bilbo
avahi-daemon[3231]: Leaving mDNS multicast group on interface eth1.IPv6 with
address fe80::20e:35ff:fec2:93ee. May 26 14:54:47 bilbo
avahi-daemon[3231]: Withdrawing address record for fe80::20e:35ff:fec2:93ee on
eth1. How can I get it to recognise my wireless card and get my
networking to work? Thanks I advance Gordon Stewart |
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
