My LCD Philips is only capable of 1280x768 @ 60Hz. I try to change the resolution of the laptop to 1024x768 and after restarting both two LCD were working. But I've noticed the screen resolution of the laptop was turn into big / larger width unlike before which is fit resolution (1024x768 default without hooking up the external Philips LCD monitor).
Here's the output from xrandr command.
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1600 x 1600
VGA connected 1024x768+0+0 (normal left inverted right x axis y axis) 370mm x 221mm
1024x768 75.1*+ 75.0 70.1 60.0
1280x768 60.0 +
1600x1024 60.2
1440x900 59.9
1280x960 60.0
1360x768 59.8 60.0
1152x864 70.0 60.0
1280x720 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 72.8 75.0 66.7 60.0 59.9
720x400 70.1
LVDS connected 1024x768+0+0 (normal left inverted right x axis y axis) 300mm x 190mm
1024x768 60.0*+
1280x800 59.9 +
800x600 60.3
640x480 59.9
TV disconnected (normal left inverted right x axis y axis)
I try to use xrandr shown below but it's never work and I don't know how to use it just to fix the problem. I found your message logged through google.
xrandr --output VGA-0 --mode 1024x768 --output LVDS-0 --mode1024x768 --left-of VGA-0
and nothing happens.
-james
On Thu, May 22, 2008 at 3:01 PM, Paul Johnson <pauljohn32@xxxxxxxxx> wrote:
2008/5/22 James Corteciano <linux@xxxxxxxxxxxxxxxxx>:
> Hi guru's,It only sees one monitor now. Can you plug in both monitors and
>
> I was running Fedora 9 at my Dell inspiron 640m with video spec "Intel(R)
> Media Accelerator 950 Graphics Up to 224MB shared system memory". My video
> card is work out-of-the-box after installation but when I try to hook up my
> 17" LCD Philips monitor and trigger up the "[Fn] + F8 (CRT/LCD)" key to make
> an output then it show's blank screen with blinking something. Before it
> work's great at Ubuntu 7.10 and I've decided to switch into Fedora 9.
>
> Here is the output using xrandr command:
>
> Screen 0: minimum 320 x 200, current 1280 x 800, maximum 1280 x 1280
> VGA disconnected (normal left inverted right x axis y axis)
> LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 300mm
> x 190mm
> 1280x800 59.9*+
> 1024x768 60.0
> 800x600 60.3
> 640x480 59.9
> TV disconnected (normal left inverted right x axis y axis)
>
> and my xorg.conf is here. <http://paste.pocoo.org/show/52568/>
re-start the system and then check xrandr? It should show monitors
like VGA-0 and VGA-1 or such.
>From command line you can experiment with settings,
xrandr --output VGA-0 --output VGA-1 left-of
Since xrandr can work interactively, experiment with that, and then
try the xorg approach. I do have a working xorg.conf that I posted in
this email list last Friday, in a message with a title "dual head
howto for xrandr; problem with window manager, no more merged fb or
xinerama flags"
HTH
--
Paul E. Johnson
Professor, Political Science
1541 Lilac Lane, Room 504
University of Kansas
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
