On Fri, 2008-05-02 at 15:39 -0400, Jeffrey Ross wrote: > > Patrick wrote: > > On Fri, 2008-05-02 at 14:10 -0400, Jeffrey Ross wrote: > > > >> I'm trying to get a PVR-350 working in the system which is Fedora 9 > >> x86_64. I've search and seem to only be able to find instructions for > >> Ubunto or older versions of Fedora. > >> > >> pointers would be appreciated. > >> > >> The card shows up with lspci -v as: > >> > >> 07:02.0 Multimedia video controller: Internext Compression Inc iTVC15 > >> MPEG-2 Encoder (rev 01) > >> Subsystem: Hauppauge computer works Inc. WinTV PVR-350 > >> Flags: bus master, medium devsel, latency 32, IRQ 11 > >> Memory at 90000000 (32-bit, prefetchable) [size=64M] > >> Capabilities: [44] Power Management version 2 > >> Kernel modules: ivtv > >> > > > > Last week I installed MythTV 0.21 on a box with F8 and a Hauppage > > PVR-500. The only thing it took was enabling the atrpms repo and do a > > yum install mythtv. I looked at using F9/Rawhide too but iirc atrpms > > does not have MythTV RPMs for F9/Rawhide yet. Or maybe it just uses the > > ones from F8. Not sure, you can give it a try. This guide still applies > > to F8 and probably to F9 too. Includes stuff about drivers for your PVR > > card (ivtv): http://wilsonet.com/mythtv/fcmyth.php > > > > Regards, > > Patrick > > > > > right now Mythtv is a little more than I wanted to install at the > moment. However I tried, but I run into a failure with > > "Error: Missing Dependency: libmp4ff.so.0()(64bit) is needed by package > mythmusic" > > of course I wasn't using the ATrpms but the Livna repository... > > suggestions on how to get out of the dependency problems? I'm using a pvr-150 on F7-x86_64. It uses the ivtv driver, which is already included in the kernel. A yum install ivtv should pull in several modules, including the perl video and ivtv firmware modules, assuming that they're ready for f9. I'm guessing that the two different tuners will occupy /dev/video0 and /dev/video1 unless you've got a webcam, or some other video input. Do a google for "pvr-150 lirc" and you should find a modified lirc that will let you use both the input and output ir devices. Note that the outputs on /dev/videox are encoded in mpeg2, so you'll need something like mplayer or vlc to play it. Unfortunately, it doesn't throw in nav packets, so you'll have to do a demux/mux operation if you want to burn the output to a video dvd. Dave -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
