On Mon, 2008-03-24 at 13:49 -0500, Roger Heflin wrote: > Gerhard Magnus wrote: > > On Mon, 2008-03-24 at 12:55 -0500, Roger Heflin wrote: > >> Gerhard Magnus wrote: > >>> On Mon, 2008-03-24 at 10:38 -0600, Aaron Konstam wrote: > >>>> No route to host sounds more like a connection problem. You can ssh between the machines? > >>>> -- > >>> ssh works fine. I've been googling this problem and found that other > >>> people have had it and it may be a serious bug. Could it be that NFS > >>> doesn't work in fedora and that everybody uses samba anyway? > >>> > >> Nope, NFS works fine in FC8, both the default kernel, and a number of the > >> upgrade kernels, no one in their right mind uses SAMBA within a group of > >> Linux/Unix machines, Samba is typically only used when exporting Linux/Unix disk > >> to machines that don't have NFS support. > >> > >> "no route to host" *IS* a connection problem, run the commands "netstat -r" and > >> "ifconfig -a" on both the server and client machine, and return the output. > >> > >> Roger > >> > > OK... Here's the server: > > > > > > > ...and the client: > > In trying to fix this, I've since run "service iptables stop" on both boxes to shut down the firewalls. Then I was able to mount the shared directory on the client without problems. I started iptables again and can still see the shared directory on the client. > I don't see anything in either that stands out as wrong, both machines are > plugged into the "LAN" ports of the router? yes > > Try "arp -a" on both the client and server, and see what returns. Here's the server: magnusg@PuteF Mon Mar 24 12:04:28 [270] ~ $ arp -a PuteB.SMAssociates.com (192.168.1.13) at 00:13:20:8C:8D:D2 [ether] on eth0 ...and the client: magnusg@PuteB Mon Mar 24 12:11:05 [583] /mnt/PuteF $ arp -a PuteF.SMAssociates.com (192.168.1.14) at 00:16:76:C2:73:01 [ether] on eth0 ? (192.168.1.1) at 00:06:25:09:6C:22 [ether] on eth0 > If the arp command does not show the other machine, try pinging the other > machine and rerun the "arp -a". "arp -a" on the server shows the client, while "arp -a" on the client shows the server. > And can you both ping and ssh both directions? client -> server and server -> > client? yes, both ping and ssh work fine. Is there some other port I need to open to get this to work? -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
