On Fri, 2008-03-21 at 06:36 -0600, Aaron Konstam wrote: > On Fri, 2008-03-21 at 01:30 -0400, Rick Bilonick wrote: > > On Thu, 2008-03-20 at 16:31 -0700, Rick Stevens wrote: > > > Rick Bilonick wrote: > > > > On Fri, 2008-03-21 at 02:37 +0530, Rahul Sundaram wrote: > > > >> Aaron Konstam wrote: > > > >> > > > >>> I don't think NM supports static addresses yet but soon. > > > >>> -- > > > >> It has partial support in Rawhide. If you create static networks with > > > >> system-config-network, NM will honor them. It hasn't grown a UI to > > > >> create a new one from scratch but that is planned. > > > >> > > > >> Rahul > > > >> > > > > > > > > This all misses the point. I've turned NM off and killed everything I > > > > can think of yet wlan0 keeps getting activated. How do I stop it from > > > > screwing up my static network connection? nm-applet USED TO HAVE a > > > > button for a wired network under Fedora 6 and my wireless and wired > > > > connections worked together without any problem. Under Fedora 8, the > > > > wired connection disappeared, reappeared briefly, and now is gone again. > > > > Why are we going backwards? > > > > > > Make sure you have "ONBOOT=no" in the > > > /etc/sysconfig/network-scripts/ifcfg-wlan0 file. > > > ---------------------------------------------------------------------- > > > - Rick Stevens, Systems Engineer rps2@xxxxxxxx - > > > - Hosting Consulting, Inc. - > > > - - > > > - Any sufficiently advanced technology is indistinguishable from a - > > > - rigged demo. - > > > ---------------------------------------------------------------------- > > > > > > > wlan0 is not set to be activated on boot. I will have to set NM not to > > come on when the machine boots. Maybe that will help. I would imagine > > there are a lot of people who have wireless at home and a wired > > connection at the office. It used to work just fine under Fedora 6. > > > > Rick B. > > > NM never worked with static address connections. wired and wireless yes > but both using DHCP. Actually, a LONG time ago (or at least it feels like it - read: "I don't remember when it stopped"), NM actually read my ifcfg-eth0. Perhaps this is when it was "first" introduced and all it was doing was an "ifup eth0" on its own, but I did use it that way and was able to have static on wired and dynamic on wireless. I don't remember if static on wireless every worked since I never had that "need". And, yes, current situation in terms of "released" code is that the settings are embedded at a "user" level and currently only support dynamic, though static support is "coming" as is earlier starting in the boot process with "system" rather than "user" settings.... But I have plenty of patience, as it still has not hit 1.0 after all..... --Rob -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
