On Tue, 2008-02-26 at 08:11 -0500, Ray Curtis wrote: > > Don't know if these have been suggested but, > Have you also checked that you have loaded the visor module with > this entry in /etc/modprobe.conf : > options visor vendor=0x0830 product=0x0061 > > then do a modprobe visor All, pilot-link is undergoing some tweaks and fixes and such and the currently released packages pretty much have everything broken. If you want to make some headway, do this: Forget all about visor.ko. It's old-hat. Snag the latest pilot-link from Koji (http://koji.fedoraproject.org/koji/buildinfo?buildID=35760) and upgrade your installation (you may also need pilot-link-devel). Remove any udev hacks that you have put in place (60-libpisock.rules or whatever) you won't need it. After pilot-link is updated, plug in your Palm and initiate a hotsync. The first time around, HAL is likely to segfault (check /var/log/messages). Restart HAL with /etc/init.d/haldaemon restart. Now, execute: pilot-xfer -p usb: -l and initiate a hotsync when prompted. You should get a dump from the phone. If all is well, change your Palm sync app to use the 'usb:' device instead of /dev/ttyUSBx and you should be in good shape. -- David Hollis <dhollis@xxxxxxxxxxxxxx> -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
