Re: A sound problem one more time.- THE SOLUTION AT LAST (PLEASE NOTE)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2008-02-15 at 20:09 +0100, Nigel Henry wrote:
> On Friday 15 February 2008 02:35, Mark C. Allman wrote:
> > On Thu, 2008-02-14 at 22:13 +0100, Nigel Henry wrote:
> > > On Thursday 14 February 2008 18:01, Mark C. Allman wrote:
> > > > On Wed, 2008-02-13 at 22:43 +0100, Nigel Henry wrote:
> > > > > On Wednesday 13 February 2008 21:34, Frank Chiulli wrote:
> > > > > > Nigel,
> > > > > > I have a Sound Blaster Live! Value.  This is an older machine.  F8
> > > > > > detected the card automatically.  Unfortunately I can't tell you
> > > > > > exactly when I got the error.  I had tried lots of things to get
> > > > > > sound to work but never did.  It wasn't a big deal.  Then I was
> > > > > > looking at something else when I was the error.  I figured that I
> > > > > > would take a look at it.  It seems like an easy fix.  It seems
> > > > > > pretty obvious to me what was wrong.  So I corrected it.  Then
> > > > > > sound worked.
> > > > > >
> > > > > > Frank
> > > > >
> > > > > Thanks for the reply Frank. I was hoping that you would say that your
> > > > > card was also an isa one, and would tie it in with Aarons problems.
> > > > >
> > > > > It's nice to see that both of you have resolved the problem, but
> > > > > what's going on to cause these problems is beyond me.
> > > > >
> > > > > As you see from what I posted above, my audigy2 soundblaster was
> > > > > detected ok, and apart from disabling pulseaudio by removing
> > > > > alsa-plugins-pulseaudio, and adding the usual lines to
> > > > > /etc/modprobe.conf for my usb midi keyboard that uses snd-usb-audio,
> > > > > the sounds are working ok.
> > > > >
> > > > > Anyway, the fact that both you and Aaron now have sounds is the main
> > > > > thing. Quite why you've both had problems, and me none, I've no idea.
> > > > > That's computers for you.
> > > > >
> > > > > Nigel.
> > >
> > > Mark says:
> > > > When I run the "alsa-info.sh" script I see an error message when it
> > > > tries to collect the data that says something like "no soundcard
> > > > found." I think it's the same error that I see when I run aplay to list
> > > > out cards:
> > > >     [mcallman@prez tmp]$ aplay -l
> > > >     aplay: device_list:205: no soundcards found...
> > > >
> > > > Also, when I look at the script results, I see the following at about
> > > > line 65 (this is after I tried "model=toshiba" in modprobe.conf even
> > > > though my laptop is a Dell XPS 1710):
> > > >     Loaded sound module option
> > > >     --------------------------
> > > >     Module: snd_hda_intel
> > > >     enable : N
> > > >     id : <NULL>
> > > >     index : 0
> > > >     model : toshiba
> > > >     position_fix : 0
> > > >     power_save : 0
> > > >     power_save_controller : Y
> > > >     probe_mask : -1
> > > >     single_cmd : N
> > > >
> > > > Could the "enable: N" line be the key here?  For those of you that have
> > > > sound working, what do you see listed for "enable?"
> > > >
> > > > If it helps, you can look at all the test results that the script
> > > > uploaded at:
> > > >     http://pastebin.ca/903970
> > > >
> > > >
> > > > -- Mark C. Allman, PMP
> > >
> > > Hi Mark. I've sort of lost the plot a bit, but do you have your sound
> > > working now?
> > >
> > > I ask because the Alsa development folks are working hard on resolving
> > > problems, particularly with the hda intel cards. Alsa driver 1.0.16 has
> > > just been released, and I see many patches being applied to the hda intel
> > > codecs, including your STAC9200 one.
> > >
> > > Nigel.
> >
> > Sound works using:
> >     Pidgin
> >     VLC (playing Rush/Tom Sawyer right now)
> >     RealAudio
> >
> > It does not work for:
> >     gnome-cd (won't start a track)
> >     grip (starts reading tracks, but no sound)
> >     aplay/arecord ("no soundcard found")
> >     Flash in Firefox
> >     system-config-soundcard (everything's there--just no sound!!)
> >
> > I can pipe a ".au" file (if I remember the extension correctly)
> > to /dev/audio and I hear it.
> >
> > Some "/proc/asound" stuff:
> >     [mcallman@prez X11]$ ls /proc/asound/
> >     card0 cards devices hwdep Intel modules oss pcm seq timers version
> >     [mcallman@prez X11]$ cat /proc/asound/cards
> >      0 [Intel          ]: HDA-Intel - HDA Intel
> >                           HDA Intel at 0xdfffc000 irq 21
> >     [mcallman@prez X11]$ ls /proc/asound/card0
> >     codec#0  codec#1  id  oss_mixer  pcm0c  pcm0p  pcm1p
> >     [mcallman@prez X11]$ cat /proc/asound/pcm
> >     00-01: STAC92xx Digital : STAC92xx Digital : playback 1
> >     00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 1
> >     [mcallman@prez X11]$ cat /proc/asound/modules
> >     0 snd_hda_intel
> >     [mcallman@prez X11]$ cat /proc/asound/devices
> >       2:        : timer
> >       3:        : sequencer
> >       4: [ 0- 1]: digital audio playback
> >       5: [ 0- 0]: digital audio playback
> >       6: [ 0- 0]: digital audio capture
> >       7: [ 0- 1]: hardware dependent
> >       8: [ 0- 0]: hardware dependent
> >       9: [ 0]   : control
> >     [mcallman@prez X11]$ ls -ld /proc/asound/Intel
> >     lrwxrwxrwx 1 root root 5 2008-02-14 20:18 /proc/asound/Intel ->
> > card0
> >
> > Any suggestions would be welcome.  If any of the Alsa development folks
> > would like a test bed to try out ideas just let me know.
> >
> > -- Mark C. Allman
> 
> Hi Mark. I know I've got pulseaudio on the brain, as I had problems with it, 
> and disabled it, but have you got the default install of F8, where pulseaudio 
> is enabled? I ask because of the sound apps that you have working. Realplayer 
> uses OSS, VLC uses natively OSS, or Alsa, and also Gnomes ESD. Not sure about 
> Pidgin (Gaim), but I believe it uses OSS for it's sounds. Puzzling why Alsa 
> apps won't work.
> 
> If you havn't messed with pulseaudio since installing F8, I think I'd do a:
> yum remove alsa-plugins-pulseaudio
> 
> having done that I'd see if now aplay, audio cd's, etc work.
> 
> Enough for now.
> 
> Nigel.

The only PulseAudio package I have installed is
pulseaudio-libs-0.9.8-5.fc8.  It's needed for
libflashsupport-000-0.1.svn20070904.

The OSS packages I have installed:
   alsa-oss-libs-1.0.14-3.fc8
   nss_compat_ossl-0.9.2-3.fc8
   alsa-oss-1.0.14-3.fc8
   alsa-plugins-oss-1.0.15-2.fc8


-- Mark C. Allman, PMP
-- Allman Professional Consulting, Inc.
-- www.allmanpc.com, 617-947-4263

BusinessMsg -- the secure, managed, J2EE/AJAX Enterprise IM/IC solution




-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux