Hello I don't think the 'enable: N' is whats messing snd-hda-intel up. I tried to run the alsa-info.sh script on my computer wish have two kernels, one where snd-hda-intel works and one where it dosen't. They both reported 'enable: N'. The only difference I could se was that the working kernel also loaded the snd_seq_dummy module, so I tried to load that manualy on the none working one but with no luck. This is the output from the working 2.6.23.9-85.fc8 kernel: http://pastebin.ca/904073 This is the output from the none working 2.6.23.15-137.fc8 kernel: http://pastebin.ca/904084 tor 2008-02-14 klockan 12:01 -0500 skrev Mark C. Allman: > On Wed, 2008-02-13 at 22:43 +0100, Nigel Henry wrote: > > On Wednesday 13 February 2008 21:34, Frank Chiulli wrote: > > > On Feb 13, 2008 10:09 AM, Nigel Henry <cave.dnb2m97pp@xxxxxxxxxxxx> wrote: > > > > On Wednesday 13 February 2008 15:58, Aaron Konstam wrote: > > > > > On Tue, 2008-02-12 at 21:07 -0800, Frank Chiulli wrote: > > > > > > On Feb 12, 2008 1:17 PM, Aaron Konstam <akonstam@xxxxxxxxxxxxx> wrote: > > > > > > > I got no answer to my question about sound in f8 working only as > > > > > > > root, so let me ask the question a different way. > > > > > > > > > > > > > > This could only happen if some vital component in processing sound > > > > > > > has the wrong permissions. Could any one suggest what that > > > > > > > component could be? This is very frustrating. > > > > > > > -- > > > > > > > =================================================================== > > > > > > >==== To the systems programmer, users and applications serve only to > > > > > > > provide a test load. > > > > > > > =================================================================== > > > > > > >==== Aaron Konstam telephone: (210) 656-0355 e-mail: > > > > > > > akonstam@xxxxxxxxxxxxx > > > > > > > > > > > > > > -- > > > > > > > fedora-list mailing list > > > > > > > fedora-list@xxxxxxxxxx > > > > > > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > > > > > > > > > > Aaron, > > > > > > I had the same problem. But I was also getting a startup message > > > > > > about a syntax error in > > > > > > /etc/security/console.perms.d/50-default.perms on line 19 at 0600. > > > > > > The error was a right paren instead of a greater than: <sound) > > > > > > <sound> > > > > > > > > > > > > Once I corrected that sound worked just fine. > > > > > > > > > > > > Frankt > > > > > > > > > > Your a genius. Or at least you had the critical piece of information. > > > > > My /etc/security/console.perms.d/50-default.perms had no sound clauses > > > > > at all. It had no cdrom clauses either. Once that correction was made > > > > > sound works. I will have to remember to check that in the future. > > > > > > > > > > > > > > > But how could that have happened. I assume it was related to the system > > > > > not recognizing the sound card. > > > > > > > > Hi Aaron. I'm glad you have the problem resolved. I'd had a look in my > > > > F8's /etc/security/console.perms.d/50-default.perms, after seeing Franks > > > > post, and it's as below. > > > > > > > > # device classes -- these are shell-style globs > > > > <pilot>=/dev/pilot > > > > <scanner>=/dev/scanner* /dev/usb/scanner* > > > > <rio500>=/dev/usb/rio500 > > > > <fb>=/dev/fb /dev/fb[0-9]* \ > > > > /dev/fb/* > > > > <kbd>=/dev/kbd > > > > <joystick>=/dev/js[0-9]* > > > > <gpm>=/dev/gpmctl > > > > <dri>=/dev/nvidia* /dev/3dfx* /dev/dri/card* > > > > <mainboard>=/dev/apm_bios > > > > <pmu>=/dev/pmu > > > > <bluetooth>=/dev/rfcomm* > > > > <irda>=/dev/ircomm* > > > > <dvb>=/dev/dvb/adapter*/* > > > > > > > > # permission definitions > > > > <console> 0600 <pilot> 0660 root.uucp > > > > <console> 0660 <scanner> 0660 root.lp > > > > <console> 0600 <fb> 0600 root > > > > <console> 0600 <kbd> 0600 root > > > > <console> 0600 <joystick> 0600 root > > > > <console> 0700 <gpm> 0700 root > > > > <console> 0600 <mainboard> 0600 root > > > > <console> 0600 <rio500> 0600 root > > > > <console> 0600 <pmu> 0600 root > > > > <console> 0600 <bluetooth> 0600 root > > > > <console> 0600 <irda> 0600 root > > > > <console> 0600 <dvb> 0600 root > > > > > > > > <xconsole> 0600 /dev/console 0600 root.root > > > > <console> 0600 <dri> 0600 root > > > > > > > > As you can see there are no sound, or cdrom clauses, and the fresh > > > > install of F8 picked up the soundcard (audigy2 soundblaster) ok. Apart > > > > from disabling the infamous pulseaudio, the only other thing necessary > > > > was to add alias, and options lines for snd-usb-audio in > > > > /etc/modprobe.conf, so that my usb midi keyboard didn't end up in the > > > > card0 position. > > > > > > > > It would be nice to know which soundcard Frank Chiulli has on his > > > > machine, that gave a similar problem to you, and if the soundcard was > > > > picked up automatically when he did the install, or whether he had to run > > > > system-config-soundcard to configure the card, and only after doing that, > > > > discovered the badline in /etc/security/console.perms.d/50-default.perms. > > > > > > > > Aaron. Do you still have to add a "modprobe snd-cs4236" line in > > > > /etc/rc.local in F8, as you had to do since FC6, as per your earlier > > > > post? > > > > > > > > I wonder if this is a kernel, or Alsa related problem, as you said it > > > > wasn't limited to Fedora 6 onwards, but also on Ubuntu 6.06, 7.2, and > > > > 7.10, therefore the problem with snd-cs4236 does not, on the face of it > > > > appear to be distro specific. By the way, and IIRC, I thought I read > > > > somewhere that support for isa soundcards was not as it used to be. > > > > > > > > Would you download this script, as below, run it, and post the link to > > > > pastebin back. It may well provide some usefull info about your machine, > > > > soundcard, etc. > > > > > > > > http://hg.alsa-project.org/alsa/raw-file/tip/alsa-info.sh > > > > > > > > It may be usefull to the Alsa development folks, and I'll post the > > > > pastebin link there, with all the relevant details regarding your isa > > > > soundcard, and what is necessary to get it to work. > > > > > > > > Nice to have the sounds working again eh! > > > > > > > > All the best. > > > > > > > > Nigel. > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > fedora-list mailing list > > > > fedora-list@xxxxxxxxxx > > > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > > > > Nigel, > > > I have a Sound Blaster Live! Value. This is an older machine. F8 > > > detected the card automatically. Unfortunately I can't tell you > > > exactly when I got the error. I had tried lots of things to get sound > > > to work but never did. It wasn't a big deal. Then I was looking at > > > something else when I was the error. I figured that I would take a > > > look at it. It seems like an easy fix. It seems pretty obvious to me > > > what was wrong. So I corrected it. Then sound worked. > > > > > > Frank > > > > Thanks for the reply Frank. I was hoping that you would say that your card was > > also an isa one, and would tie it in with Aarons problems. > > > > It's nice to see that both of you have resolved the problem, but what's going > > on to cause these problems is beyond me. > > > > As you see from what I posted above, my audigy2 soundblaster was detected ok, > > and apart from disabling pulseaudio by removing alsa-plugins-pulseaudio, and > > adding the usual lines to /etc/modprobe.conf for my usb midi keyboard that > > uses snd-usb-audio, the sounds are working ok. > > > > Anyway, the fact that both you and Aaron now have sounds is the main thing. > > Quite why you've both had problems, and me none, I've no idea. That's > > computers for you. > > > > Nigel. > > > When I run the "alsa-info.sh" script I see an error message when it > tries to collect the data that says something like "no soundcard found." > I think it's the same error that I see when I run aplay to list out > cards: > [mcallman@prez tmp]$ aplay -l > aplay: device_list:205: no soundcards found... > > Also, when I look at the script results, I see the following at about > line 65 (this is after I tried "model=toshiba" in modprobe.conf even > though my laptop is a Dell XPS 1710): > Loaded sound module option > -------------------------- > Module: snd_hda_intel > enable : N > id : <NULL> > index : 0 > model : toshiba > position_fix : 0 > power_save : 0 > power_save_controller : Y > probe_mask : -1 > single_cmd : N > > Could the "enable: N" line be the key here? For those of you that have > sound working, what do you see listed for "enable?" > > If it helps, you can look at all the test results that the script > uploaded at: > http://pastebin.ca/903970 > > > -- Mark C. Allman, PMP > -- Allman Professional Consulting, Inc. > -- www.allmanpc.com, 617-947-4263 > > BusinessMsg -- the secure, managed, J2EE/AJAX Enterprise IM/IC solution > > > > -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
