Finally gave up on my first install of FC 8 and did a second install.
Since This was the second time around, I knew what to look for and
wasn't as nervous and checked out ALL of the options. Found out that I
pretty much did everything right the first time around. The only thing I
did differently this time was to customize the packages installed. This
allowed me to install KDE right up front instead of having to do so
afterwards. Also got to check out other packages for initial
installation. That was the only thing that I did diferently. As I said,
Ihad done everything right the first time around.
This reminded me of FC 5 - I had to install FC 5 3 or 4 times to get a
good installation or at least a workable installation. On FC 5 I ended
up doing 95% of new program installs and upgrades from source because
the rpm program continually corrupted its own database.
What I did like about the FC installation process - I CAN install
everything right at the beginning instead of having to do so piece by
piece as I discover I need it and then need to spend hours searching
through documentation trying to find out which package is needed and
where to get it. Getting everything right up front is a lot better and
considerably less frustrating.
What I didn't like about the installation process - after I marked
everything I wanted for installation, a window opens and says that the
installation is starting and that this could "take a few minutes". The
few minutes turned into 35 minutes using a high speed DSL network
connection at over 3 mb/sec. Now I'm not complaining about the 35
minutes, what really bothered me was wondering for 35 minutes if the
process had hung. A little visual feedback at that point would really,
really be appreciated. If the initialization process takes only "a few
minutes" then the feedback wouldn't be there long, but 35 minutes is a
long time to be left hanging and wondering and wondering and wondering
.........
After the reboot, a notification came up and said that xxx security
updates needed to be done. I decided not to do that immediately. I first
used the "add/remove software" program (pirut??) to download and install
"apcupsd". Then remembered gnucash, Booted the program again and tried
to install gnucash. Everything worked fine until it came time to
download the packages. The downloading process hung. After 20 minutes, I
tried to close the window and was informed that the process was not
responding and so I "terminated" the process. Tried again and after a
some time a window opened and informed me that the process had
encountered a fatal error. I clicked on the "save" button to save the
information to a file to send to bugzilla, but could never find the file
to send. Don't think a file was ever created with the information to send.
Then tried to apply the security updates. Same thing happened. So the
updating and add/remove program is hanging and never completing.
This is probably "pirut" for both???
I tried to log out. KDE would not do so. Bring up the log out dialog,
click on "logout" and nothing happens. Everything is still running. I
can change desktops and activate programs, just could not logout. Tried
multiple times - same result.
Finally had to hit the hardware reset button.
KDE logout worked after the h/w reboot, but the program to update things
still hangs.
Is there anyway to get program update and add/remove s/w to complete??
Should I re-install pirut??
If so how do I go about doing that. I can use the command line and have
done so for over 20 years, but am not an expert on programs that I only
need every 5 or 10 years.
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
