Ric Moore wrote:
Lordy Rick, I'm an old BBS sysop from back when. I have a RS Robotics external with all the bells and whistles in hardware, so I'm connected only by a serial cable. I'm gonna check out your suggestion about the IRQ though. I sure miss setting pin jumpers. Devices generally stayed where you put 'em, IRQ wise. Here's /proc/interrupts
<----------------------[snip]--------------->
One thing I have noticed is that the IRQs will not show up unless something is actually using the device. For serial ports, the IRQ will not show up until something opens the port. Something on the line of if there isn't anything that is going to process it, the IRQ is disabled, and does not show up in the list.I don't see IRQ 3 or 4 listed for serial port. Do I have to gink with uugetty or set serial? Is that the right place to look?? Ric
I don't know if it will help, but you may want to check with setserial to see if it is detecting the correct UART type. You can also try adjusting the FIFO settings. If the driver is treating the UART as if it does not have a FIFO, or if the FIFO settings are wrong, then the serial port will generate too many interrupts. It is possible that it is generating one interrupt per character sent/received.
Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup!
Attachment:
signature.asc
Description: OpenPGP digital signature
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list