Les wrote:
IDE was one of the early standards. It evolved way early in the
progress of computers:
1985: Control Data, Compaq Computer, and Western Digital collaborate to
develop the 40-pin IDE interface. IDE stands for Intelligent Drive
Electronics, more commonly known as Integrated Drive Electronics.
(http://pcworld.about.com/news/Sep132006id127105.htm)
This was the first attempt to standardize the interface between mass
storage and computer systems. Actually, though, a similar interface was
developed by several different companies around the 1978 timeframe. I
owned a Northstar single density hard-sectored 5.25" disk system for my
Altair 8080B that used a similar connector and controller around 1979.
I still have it by the way.
Basically the disks had little electronics on them. But they needed to
move the head to different tracks, keep track of the disk position,
write data to the disk, read data from the disk, change the data from a
serial stream to a parallel word, and pass that word back to the
computer. The IDE standard established the number of bits required to
perform these functions, a means to establish which disk to boot from
and a method to perform the dat transfer, along with all the stuff
needed to control disk speed, sector count, and buffer the data.
There was a half step between IDE and SCSI called ESDI. The design of
the original IDE had some size limitation that prevented disks from
growing to meet demands. I don't know too much about it any more, but I
did work on some systems that had it:
1985: Western Digital produces the first ESDI (Enhanced Small Device
Interface) controller board, which allows larger capacity and faster
hard drives to be used in PCs.
(http://pcworld.about.com/news/Sep132006id127105.htm)
There was also EIDE.
SCSI is a serial system, or at least it can be. It allows virtually
With 50 and 68 pins it wasn't serial;-)
unlimited storage size, and has been implemented as a mother board in
several systems, where the drives plug directly into the frame. In
these cases the mother board also forms the means to permit hotplug, by
establishing the mechanical order of contact and the buffering of the
pins from spiking.
SCSI was originally deployed by apple as noted in the article, but also
in commercial applications. Sun Systems almost exclusively used SCSI
due to speed and capacity needed for their workstations. Also the SCSI
bus system was ideal for server systems where large quantities of data
had to be stored and quickly retrieved.
It's even made its way to the IBM mainframes; folk attach them to their
zSeries systems.
--
Cheers
John
-- spambait
1aaaaaaa@xxxxxxxxxxxxxxxx Z1aaaaaaa@xxxxxxxxxxxxxxxx
-- Advice
http://webfoot.com/advice/email.top.php
http://www.catb.org/~esr/faqs/smart-questions.html
http://support.microsoft.com/kb/555375
You cannot reply off-list:-)
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
