Hello All, I'm trying to get Wake-On-LAN working on my Fedora 7 machine. The LAN controller is a built-in one on an ASUS P5KR motherboard. WOL is enabled in BIOS. I usually shut down the machine using a 'Power' button on the case itself. The problem is that the 'wake-on' parameter changes to 'd' (disabled) when I shut the machine down, so WOL does not work. After searching the Net, I found a nice article: http://www.chukhang.com/francis/?page=Geek/fedora_wol After changing the halt script, it still does not work. I still have to manually power up the machine and then I see the 'Wake-on' flag is changed back to 'd'. # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: umbg Wake-on: d Link detected: yes #lspci -v <...skipped...> 02:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) Subsystem: ASUSTeK Computer Inc. Unknown device 8226 Flags: bus master, fast devsel, latency 0, IRQ 218 Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fe9a0000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [58] Express Endpoint IRQ 0 So what am I doing wrong??? -- Best regards, Andrew -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
