--- "Mikkel L. Ellertson" <mikkel@xxxxxxxxxxxxxxxx> wrote:
> Mr.Scrooge wrote:
> > --- Kam Leo <kam.leo@xxxxxxxxx> wrote:
> >
> >>> Now, I want to create internal network. Is it just a matter of changing
> >>> the desktop that represents the internal network to a different subnetwork?
> >>> dsl modem = 192.168.0.1
> >> The modem does not have an address.
> > Yes it does. Many DSL modems also provide a firewall. Change the range of addresses handed out
> by
> > the router to something different than what is on the DSL modem. So if the modem is
> 192.168.0.1
> > then change the router to handout 192.168.1.0 network addresses. The hub is unnecessary. The
> > router should handle dhcp for your two clients and the modem will give an address to the
> router.
> > One interface faces the modem (typically labeled internet) the other ports face the network.
> So in
> > the router setup, the address for the router should be 192.168.0.2 if the dsl modem is
> > 192.168.0.1
> >
> > -Max
> >
> The WAN IP address of the router depends on the configuration. On my
> router, it is the "real" IP address. But I have the modem set up to
> do the PPPoE connection, not the router. The DSL modem is still
> 192.168.0.1, and has a nice status WEB page. the LAN address of the
> router is 192.168.1.1, and the WAN address is 68.248.xxx.xxx
>
> Mikkel
> --
You can still log in to your modem?
-Max
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
