On Wed, 2008-01-02 at 15:32 -0500, Greg Sieranski wrote: > Marcel Janssen wrote: > > On Wednesday 02 January 2008, Lonni J Friedman wrote: > > > >> If madwifi isn't working then ath5k isn't going to work either. > >> madwifi supports more hardware than ath5k. > >> > > > > I've got a similar problem as the original post. I wonder how I make sure the > > madwifi driver is used instead of the ath5k driver. > > > > If the madwifi driver supports more hardware wouldn't it make sense to not use > > the ath5k driver at all ? > > > > regards, > > Marcel > > > > > yea, i checked and currently ath5k does not support my card. Not really > sure what to do at this point other than buy an Intel wireless card. I have an AR5416 pcmcia card (D-Link DWA-652) that I'm running on a laptop using F8. I'm connecting to an old access point that only understands WEP. I can plug the card in, and it will come up reliably. The behavior of NetworkManager regressed from F7 to F8, so I disabled it: chkconfig NetworkManager off Secondly, the ath5k module was getting loaded, even with an "alias ath5k off" in modprobe.conf, so I removed it from /lib/modules. There's probably a better way, but I was too lazy to look up the interaction with pcmcia hotplug events. Since you have a PCI card, it may not be a problem with you. Finally, I changed the /etc/sysconfig/network-scripts/ifcfg-ath0 to: DEVICE=ath0 MODE=Managed WIRELESS=yes RATE=Auto ONBOOT=no BOOTPROTO=dhcp HWADDR=00:01:02:03:04:05 ESSID=MYESSID KEY=mywepkey You'll need to change ONBOOT to yes, and supply your own values for HWADDR, ESSID, and KEY. If you're not using dhcp then change bootproto to none. Also, I had to build the madwifi drivers from an svn checkout to get support for my chipset. Good luck, Dave -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
