vinod gullu wrote:
Dear All,
I had a Laptop which died a month ago. So i took out
the LAptop HD and connected it to my desktop through
USB. During boot setup i enabled boot USB as 1st
option.
Now The grub menu comes but without background splash
image . Also If i choose to boot linux or windows. A
error message comes
ERROR 18: selected cylinder length exceeds the max
supported by BIOS.
I even changed the grub.conf by modifying hd0 to hd1
as fdisk -l recognises it as sdb. But again same
message.
Can anyone help me to sort out the issue as i want to
boot the LAPTOP HD for most of my work.
1. Using Windows is almost (IANAL and most certainly not an Indian
lawrer) certainly illegal. Typically, the Windows licence permits you
to use _that copy_ on your laptop and nowhere else.
2. I understand Windows doesn't boot from USB. It would be too easy to
flout 1.
3. Try booting grub from something else, then type the commands in from
its shell. Linux _should_ work, but I'm not so sure about grub.
4. I all else fails, install a new disk in the desktop, create a Linux
partition that is no smaller than the laptop drive's Linux partition.
Then, assuming
a. your new disk is /dev/hdb,
b. the partition is 1,
c. that your laptop's drive is /dev/sdb
d. your Linux is on partition 5,
e. You are not using lvm
f. You are using ext3
copy it like this:
dd of=/dev/hdb1 if=/dev/sdb5
# Pay particular care that of correctly specifies the parition you want
to copy to.
resize2fs /dev/hdb1
# This might ask you to do an e2fsck. If so, do it as it asksm and
repeat the resize2fs
You should be able to boot this from your existing drive, from grub's
shell using commands like this:
chainloader (hd1,1)+1
boot
You can then install grub to the new disk's MBR, and set the other grub
the chain to this one.
If you're using LVM, or some other filesystem, the same general
procedure works, but you will need to adjust the particulars.
You _can_ copy your windows system too, using the NTFS tools, but I
don't expect it to run.
From there, if your desktop's licenced for Windows, you can (probably)
install to your new NTFS partition without reformatting, and retain your
existing data. Note that installing Windows replaces the MBR.
Thanks in advance.
VINOD KUMAR GULERIA
ADD/AERO
VSSC, TRIVANDRUM
KERLA- 695022
0471-2564429,2564938(OFFICE)
+91 9447109608 (RES)
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
--
Cheers
John
-- spambait
1aaaaaaa@xxxxxxxxxxxxxxxx Z1aaaaaaa@xxxxxxxxxxxxxxxx
-- Advice
http://webfoot.com/advice/email.top.php
http://www.catb.org/~esr/faqs/smart-questions.html
http://support.microsoft.com/kb/555375
You cannot reply off-list:-)
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
